{"success":true,"data":{"pressRelease":{"id":"127964","rtpr_id":"nGNX6T9wkc","ticker":"LI6","exchange":"","all_tickers":["LI6"],"title":"Koryx Copper Announces Further Drill Results at the Haib Copper Project in Southern Namibia","author":"Globe Newswire","published_at":"2026-08-26T11:00:02.953Z","article_body":"Highlights \n* Assay results reported for 19 drill holes comprising over 8,586m of infill\ndrilling.\n* Consistent, wide intercepts up to 969m in width, including 236m @ 0.57%\nCuEq.\n* High-grade mineralisation from surface in HM177, including 30m @ 1.10% CuEq.\n* All 19 holes intersected thick mineralisation including multiple intercepts\nabove average MRE grade.\n* Best 6 of 19 drill hole assay intersections as follows: * HM185:\n        413m @ 0.41% CuEq (89ppm Mo, 0.022g/t Au) (0 – 413m)\nincl.      236m @ 0.57% CuEq (156 – 392m)\n* * HM177:         413m @ 0.38% CuEq (49ppm Mo, 0.029g/t Au) (1 –\n414m)\nincl.      30m @ 1.10% CuEq (8 – 38m)\nand       18m @ 0.58% CuEq (236 – 254m)\nand       10m @ 1.33% CuEq (400 – 410m)\n* * HM168:         728m @ 0.32% CuEq (103ppm Mo, 0.027g/t Au) (1 –\n729m)\nincl.      40m @ 0.60% CuEq (288 – 328m)\nand       50m @ 0.51% CuEq (554 – 604m)\nand       72m @ 0.36% CuEq (620 – 692m)\n* * HM165:         600m @ 0.30% CuEq (35ppm Mo, 0.023g/t Au) (0 –\n600m)\nincl.      78m @ 0.43% CuEq (98 – 176m)\nand       54m @ 0.46% CuEq (270 – 324m)\nand       48m @ 0.48% CuEq (368 – 416m)\n* * HM164:         855m @ 0.28% CuEq (108ppm Mo, 0.017g/t Au) (0 –\n855m)\nincl.      110m @ 0.50% CuEq (250 – 360m)\nand       12m @ 0.41% CuEq (368 – 380m)\nand       48m @ 0.52% CuEq (592 – 640m)\n* * HM167:         969m @ 0.27% CuEq (84ppm Mo, 0.021g/t Au) (0 –\n969m)\nincl.      18m @ 0.48% CuEq (268 – 286m)\nand       58m @ 0.45% CuEq (550 – 608m)\nand       28m @ 0.42% CuEq (788 – 816m)\n\nLUXEMBOURG, Aug. 26, 2026 (GLOBE NEWSWIRE) -- Koryx Copper S.A. (TSX:KRY.V)\n(NSX:KYX) (OTCQX:KRYXF) (“Koryx” or the \"Company\") is pleased to announce\nassay results from 19 drill holes (8,586m) received as part of the ongoing\ninfill and expansion drill program on the wholly-owned Haib Copper Project\n(“Haib” or the “Project”) in southern Namibia. Haib is a massive,\ndisseminated porphyry Cu deposit with associated Mo and Au and is envisaged to\nproduce a Cu and Mo concentrate via large-scale open pit mining and\nconventional sulphide milling and flotation.\n\nHeye Daun, Koryx Copper’s President & CEO commented: “These results\ncontinue the trend of recent months, with exceptional widths at consistent and\nregular higher grades above the average MRE grade. HM167 returned 969m at\n0.27% CuEq from surface, which is our longest mineralised intersection at Haib\nto date. HM185 delivered 236m at 0.57% CuEq and HM177 returned 30m at 1.10%\nCuEq from only 8m depth again demonstrating the high-grade potential of the\nsystem. With this batch, our infill drilling is nearing completion, and\nresults continue to trend to the upside ahead of the expected late 2026\nmineral resource update.”\n\nInfill and Expansion Drill Results\n\nTarget Area 1:\n\nHM160 was drilled along the eastern edge of Target 1, results in the upper\nportion of the hole correlate well with the existing model. While higher\ngrades were anticipated at depth, the intersections returned are significantly\nwider and higher grade than expected, including 74m at 0.54% Cu, comprising 6m\nat 1.36% Cu (0.36g/t Au), and a further 8m at 1.69% Cu. Tungsten (W) was\nencountered at elevated grades over two 2m intervals, returning 994ppm and\n313ppm respectively. Mo grades are very low across the full length of the\nhole.\n\nHM169 is located north of the Volstruis River, results confirm the down-dip\nextension of mineralization in this area and correlate well with the current\nmodel. Consistent with the broader trend in this area, Mo grades remain very\nlow (<20ppm), while two 2m intervals returned 0.13g/t and 0.28g/t Au.\n\nHM170 was drilled in the south of Target 1, results indicate that higher-grade\nCu mineralization extends further south than currently modelled. Cu is well\ndeveloped over the first 164m of the hole, including 24m at 0.35% Cu and 56m\nat 0.38% Cu, with several intervals exceeding 0.5% Cu. Mo grades are low but\nincrease with depth, and gold is present, with two 2m intervals exceeding\n0.1g/t Au.\n\nHM177 is located in the centre of Target 1, this infill hole is spatially\nconsistent with the model but returned grades significantly higher than\nexpected. A 30m intersection from 8m downhole averaging 1.06% Cu is\nexceptional, containing two 2m intervals grading over 4% Cu — among the\nhighest grades returned to date at Haib. At depth, a 64m interval averaged\n0.43% Cu, including 6m at 1.86% Cu with 1,128ppm Mo, and deeper still a\nfurther 10m interval averaged 1.23% Cu, including two intervals grading over\n2% Cu. Gold grades increase from 252m downhole, including 4m at 0.27g/t Au\n(316m downhole) and 2m at 0.36g/t Au (408m downhole). Sporadic W is present at\nhigh grades to 116m downhole, and a 4m interval returned 10g/t silver (Ag) at\n316m downhole.\n\nHM181 was drilled in the south of Target 1 to better define the spatial limits\nof mineralization, this hole returned very low grades across all metals (Cu,\nMo, Au) for its full length, confirming that it lies outside Target 1\nmineralization.\n\nTarget Area 2:\n\nHM159 was drilled near the Quartz Vein that separates Target 1 and Target 2,\nintersecting it approximately 142m downhole, Cu results are consistent with\nexpectations. In the deeper portion of the hole, W is well developed,\nreturning 6m at 751ppm (574m downhole) and 30m at 139ppm W (604m downhole). Mo\ngrades increase from 250m downhole.\n\nHM164 is located in the southwest of Target 2, this infill hole returned Cu\ngrades consistent with expectations. Mo grades to approximately 800m downhole\nare strong, materially improving the Cu-equivalent grade over this interval.\n\nHM165 was drilled on the same section line as HM159, this hole begins in\nTarget 1 mineralization before passing through the Quartz Vein into Target 2.\nCu grades are lower than modelled between 36m and 74m downhole but are\notherwise consistent with expectations. Mo grades are elevated between 186m\nand 314m downhole but low elsewhere. W occurs in multiple >10m intervals\ngrading above 100ppm within the upper 294m of the hole, the widest being 12m\nat 192ppm and 18m at 118ppm. Gold grades are very low throughout.\n\n\n\nFigure 1: Plan view indicating recent drill hole locations. Results indicated\nin black are shown on the long section below\n\n\n\nFigure 2. Long section showing seventeen drillhole intersections relative to\nthe model for CuEq% Intercepts\n\nHM167 is located 70m west of HM159 and HM165, this hole remains within Target\n2 mineralization for its full length despite deviating eastwards at depth. Cu\ngrades correlate well with the current model, while Mo grades are notably\nhigher and a significant contributor to CuEq grades. Gold grades are low, and\nW occurs sporadically in 2m intervals above 100ppm throughout the hole.\n\nHM168 was drilled 60m north of HM167 along the same section line, this infill\nhole returned excellent Cu results consistent with the current model. Mo\ngrades are again very high, though in places associated with low Cu grades —\nfor example, averaging 507ppm Mo against only 0.16% Cu between 392m and 426m\ndownhole. Gold is present, with 2m at 2.58g/t Au (596m downhole) and 2m at\n0.46g/t Au (594m downhole).\n\nHM171 was drilled in the north of Target 2, as expected this hole intersected\nthe Cu-depleted East-West Fault Zone that separates Targets 2 and 3. Notably,\nthe upper, higher-grade zones intersected lie outside the current resource\nmodel and represent potential for a significant tonnage gain. Mo and gold\ngrades are very low, consistent with this area.\n\nHM175 is located 35m east of HM171, Cu results correlate well with the\nexisting model and may support a marginal tonnage gain. As expected, Mo and\ngold grades are very low.\n\nTarget Area 3:\n\nHM150 was drilled in the south of Target 3, Cu results are consistent with\nexpectations. Mo grades are generally elevated but often associated with\nlower-grade Cu (<0.20% Cu). Gold is practically absent.\n\nHM166 is located in the west of Target 3, where higher-grade mineralization\noccurs across multiple, steeply dipping, parallel zones, Cu results reflect\nthis trend and correlate with the current model. Mo grades are good,\nsupplementing the Cu-equivalent grade throughout, while gold remains low.\n\nHM173 is positioned on the western edge of Target 3, results confirm that\nhigher-grade Cu mineralization extends further west than modelled. The deeper\nintervals (30m at 0.30% Cu (94m downhole) and 92m at 0.34% Cu (176m downhole))\nboth lie outside the current model and represent potential for a significant\ntonnage gain in this region. Mo and gold grades are low throughout.\n\nHM174 was drilled 200m north of HM173 on the same section line, Cu results\ncorrelate well with the existing model. Mo grades can be locally strong\n(>100ppm), but these intervals are narrow and sporadic. Gold grades are low\nthroughout.\n\nHM185 was drilled into the centre of Target 3 mineralization, this infill hole\nreturned exceptional results consistent with the current model. Mo occurs at\nhigh levels throughout, though not always associated with higher-grade Cu. The\nreported 236m averaging 0.51% Cu (0.57% CuEq) is among the best intersections\nreturned to date at Haib in terms of contained metal, comprising numerous wide\nintervals above 0.6% Cu, including 10m at 1.00% Cu. W is present at\nconcentrations above 100ppm, though these intervals are narrow and sporadic.\n\nTarget Area 4:\n\nHM162 is collared well south of Target 4 and drilled northward into the\ntarget, this hole's higher-grade deep intersections correlate well with the\ndown-dip projection of known Target 4 mineralization. Notably, 56m at 0.35% Cu\n(124m downhole) represents entirely new Cu mineralization; while its extent is\nnot yet fully defined, this area represents a future resource-expansion\ntarget. Mo and gold grades are low throughout, although sporadic 2m W\nintervals above 200ppm were intersected.\n\nHM172 was drilled in the far south of Target 4, 8m at 0.37% Cu confirms the\npresence of, and tightens the drill spacing on, the higher-grade Cu zone\npreviously intersected in historical boreholes HB089 and HB091 in this region.\nMo and gold grades are low throughout.\n\nTable of Significant Intersections\n\n Hole# Zone From (m) To (m) Width (m)1 Cu (%) Mo (ppm) Au (g/t) CuEq (%)2 \n HM150 X: 780782, Y 6823212, Z: 481, Azimuth: 017, Dip: -74, Depth 387 \n Entire Hole 0 387 387 0.20 48 0.012 0.23 \n Main 48 54 6 0.28 48 0.009 0.30 \n Main 84 90 6 0.38 19 0.016 0.40 \n Main 96 122 26 0.32 34 0.016 0.34 \n Including 106 112 6 0.55 84 0.027 0.60 \n Main 134 144 10 0.40 67 0.020 0.43 \n Including 140 142 2 1.02 179 0.055 1.12 \n Main 238 310 72 0.30 50 0.013 0.33 \n Including 280 288 8 0.71 10 0.012 0.72 \n HM159 X: 781669, Y 6822282, Z: 573, Azimuth: 019, Dip: -79, Depth 672 \n Entire Hole 0 672 672 0.19 79 0.014 0.23 \n Main 66 136 70 0.30 82 0.019 0.35 \n Including 118 124 6 0.93 59 0.036 0.97 \n Including 130 136 6 0.41 81 0.021 0.46 \n Main 260 268 8 0.28 133 0.015 0.34 \n Main 384 432 48 0.32 102 0.015 0.37 \n Including 416 428 12 0.50 203 0.023 0.59 \n Main 556 586 30 0.28 235 0.025 0.38 \n Including 572 580 8 0.50 219 0.040 0.60 \n HM160 X: 782145, Y 6822353, Z: 413, Azimuth: 228, Dip: -82, Depth 443 \n Entire Hole 0 443 443 0.23 43 0.018 0.26 \n Main 268 270 2 0.89 452 0.105 1.13 \n Main 290 364 74 0.54 83 0.055 0.61 \n Including 296 302 6 1.36 43 0.364 1.64 \n Including 316 324 8 1.69 38 0.050 1.74 \n Including 324 332 8 0.65 144 0.042 0.74 \n Including 356 360 4 0.66 36 0.061 0.71 \n Main 404 410 6 0.36 48 0.024 0.39 \n HM162 X: 780888, Y 6822546, Z: 532, Azimuth: 020, Dip: -62, Depth 517 \n Entire Hole 0 577 577 0.19 45 0.007 0.21 \n Main 124 180 56 0.35 49 0.017 0.38 \n Including 166 176 10 0.50 68 0.018 0.54 \n Main 324 350 26 0.38 28 0.019 0.40 \n Main 364 374 10 0.34 18 0.024 0.36 \n HM164 X: 781346, Y 6822559, Z: 495, Azimuth: 025, Dip: -60, Depth 855 \n Entire Hole 0 855 855 0.23 108 0.017 0.28 \n Main 34 50 16 0.24 211 0.016 0.32 \n Including 48 50 2 0.16 1,195 0.011 0.61 \n Main 70 84 14 0.27 238 0.015 0.37 \n Main 112 116 4 0.74 30 0.065 0.80 \n Main 186 198 12 0.24 151 0.016 0.31 \n Main 250 360 110 0.36 333 0.025 0.50 \n Including 288 308 20 0.54 369 0.046 0.71 \n Including 336 342 6 0.45 1,049 0.024 0.85 \n Including 350 352 2 0.61 1,965 0.017 1.34 \n Main 368 380 12 0.18 597 0.023 0.41 \n Main 522 528 6 0.39 37 0.030 0.42 \n Main 546 552 6 0.37 48 0.022 0.40 \n Main 592 640 48 0.46 98 0.029 0.52 \n Including 620 628 8 0.59 278 0.033 0.72 \n Main 652 692 40 0.30 76 0.023 0.35 \n Including 658 666 8 0.44 149 0.030 0.51 \n Main 750 808 58 0.31 56 0.022 0.35 \n Including 776 782 6 0.40 175 0.048 0.50 \n Including 798 800 2 0.80 94 0.028 0.86 \n Main 832 846 14 0.27 59 0.016 0.31 \n HM165 X: 781700, Y 6822453, Z: 511, Azimuth: 011, Dip: -85, Depth 600 \n Entire Hole 0 600 600 0.27 35 0.023 0.30 \n Main 72 84 12 0.33 13 0.029 0.36 \n Main 98 176 78 0.41 14 0.024 0.43 \n Including 98 102 4 0.75 13 0.021 0.77 \n Including 116 128 12 0.58 41 0.042 0.63 \n Including 142 148 6 0.64 22 0.035 0.67 \n Including 170 176 6 0.53 6 0.031 0.55 \n Main 218 260 42 0.26 157 0.010 0.32 \n Including 250 254 4 0.38 664 0.015 0.63 \n Main 270 324 54 0.41 60 0.031 0.46 \n Including 300 314 14 0.77 72 0.050 0.83 \n Main 368 416 48 0.44 36 0.030 0.48 \n Including 378 380 2 0.92 46 0.052 0.97 \n Including 390 396 6 0.55 39 0.028 0.58 \n Main 488 492 4 0.82 36 0.030 0.86 \n HM166 X: 780703, Y 6823188, Z: 486, Azimuth: 021, Dip: -54, Depth 455 \n Entire Hole 0 455 455 0.20 61 0.013 0.24 \n Main 54 66 12 0.30 18 0.012 0.31 \n Main 76 84 8 0.30 88 0.013 0.34 \n Main 92 106 14 0.28 57 0.017 0.31 \n Main 122 126 4 0.51 9 0.023 0.53 \n Main 140 150 10 0.65 177 0.017 0.72 \n Including 140 144 4 1.21 6 0.015 1.22 \n Main 184 196 12 0.26 113 0.016 0.31 \n Main 250 282 32 0.29 97 0.014 0.33 \n Including 250 254 4 0.44 58 0.019 0.47 \n Including 264 270 6 0.37 306 0.013 0.49 \n Main 436 454 18 0.24 337 0.019 0.38 \n Including 438 440 2 0.45 2,440 0.046 1.37 \n HM167 X: 781610, Y 6822344, Z: 539, Azimuth: 033, Dip: -69, Depth 969 \n Entire Hole 0 969 969 0.23 84 0.021 0.27 \n Main 190 204 14 0.29 23 0.026 0.32 \n Main 216 240 24 0.34 99 0.037 0.41 \n Including 230 236 6 0.51 254 0.061 0.64 \n Main 268 286 18 0.38 189 0.034 0.48 \n Including 270 272 2 0.95 169 0.063 1.06 \n Including 282 284 2 0.53 780 0.037 0.84 \n Main 308 318 10 0.27 186 0.022 0.35 \n Main 388 398 10 0.29 35 0.023 0.32 \n Main 450 536 86 0.25 117 0.027 0.31 \n Including 508 516 8 0.37 25 0.032 0.41 \n Including 526 528 2 0.71 19 0.049 0.75 \n Including 534 536 2 0.03 2,710 0.027 1.04 \n Main 550 608 58 0.34 263 0.021 0.45 \n Main 674 694 20 0.25 236 0.026 0.36 \n Including 680 684 4 0.29 717 0.033 0.58 \n Main 724 738 14 0.34 19 0.028 0.37 \n Including 726 730 4 0.52 39 0.034 0.56 \n Main 788 816 28 0.39 42 0.026 0.42 \n Including 810 816 6 0.63 39 0.036 0.67 \n Main 846 932 86 0.32 197 0.025 0.41 \n Including 858 866 8 0.34 658 0.022 0.60 \n Including 870 884 14 0.39 371 0.026 0.55 \n Including 886 898 12 0.39 120 0.026 0.45 \n Including 904 906 2 1.03 70 0.067 1.10 \n Including 914 922 8 0.39 115 0.027 0.45 \n HM168 X: 781623, Y 6822428, Z: 495, Azimuth: 020, Dip: -63, Depth 729 \n Entire Hole 1 729 728 0.26 103 0.027 0.32 \n Main 62 70 8 0.31 63 0.019 0.35 \n Main 124 156 32 0.25 169 0.018 0.33 \n Main 170 178 8 0.39 216 0.025 0.49 \n Main 288 328 40 0.51 197 0.027 0.60 \n Including 294 302 8 1.02 52 0.042 1.07 \n Main 332 340 8 0.42 146 0.023 0.49 \n Main 358 386 28 0.29 153 0.017 0.36 \n Main 394 526 132 0.26 221 0.018 0.35 \n Including 404 416 12 0.14 878 0.020 0.48 \n Including 424 438 14 0.31 492 0.019 0.50 \n Including 452 468 16 0.34 151 0.022 0.41 \n Main 486 548 62 0.27 87 0.018 0.31 \n Main 554 604 50 0.35 158 0.143 0.51 \n Including 582 586 4 0.67 69 0.033 0.71 \n Including 594 604 10 0.44 82 0.621 0.92 \n Main 620 692 72 0.33 55 0.024 0.36 \n Including 622 626 4 0.72 11 0.036 0.75 \n Including 656 658 2 0.94 40 0.084 1.01 \n Including 682 688 6 0.43 85 0.027 0.48 \n Main 706 729 23 0.32 53 0.019 0.35 \n Including 708 716 8 0.46 57 0.026 0.50 \n HM169 X: 782013, Y 6822830, Z: 405, Azimuth: 186, Dip: -68, Depth 320 \n Entire Hole 0 320 320 0.16 9 0.028 0.19 \n Main 140 152 12 0.65 15 0.049 0.69 \n Including 142 146 4 1.14 12 0.061 1.19 \n Main 166 178 12 0.32 8 0.063 0.37 \n Main 198 204 6 0.27 15 0.052 0.32 \n Main 300 320 20 0.29 3 0.033 0.31 \n HM170 X: 782042, Y 6822245, Z: 437, Azimuth: 198, Dip: -64, Depth 314 \n Entire Hole 0 314 314 0.22 39 0.030 0.25 \n Main 2 10 8 0.35 72 0.063 0.43 \n Main 34 38 4 0.64 56 0.048 0.70 \n Main 74 98 24 0.35 21 0.037 0.38 \n Including 88 90 2 0.96 20 0.047 1.00 \n Main 108 164 56 0.38 19 0.034 0.41 \n Including 122 124 2 1.29 14 0.042 1.33 \n Including 130 138 8 0.58 35 0.043 0.63 \n Including 158 162 4 1.03 22 0.040 1.07 \n Main 254 258 4 0.28 255 0.030 0.39 \n Main 298 302 4 0.33 562 0.061 0.58 \n HM171 X: 781618, Y 6823145, Z: 429, Azimuth: 016, Dip: -59, Depth 312 \n Entire Hole 0 312 312 0.21 20 0.012 0.22 \n Main 10 54 44 0.39 34 0.015 0.41 \n Including 30 48 18 0.48 42 0.015 0.51 \n Main 92 158 66 0.30 11 0.015 0.32 \n Including 92 102 10 0.48 16 0.018 0.50 \n HM172 X: 780713, Y 6822471, Z: 557, Azimuth: 009, Dip: -73, Depth 150 \n Entire Hole 1 150 149 0.14 10 0.020 0.16 \n Main 94 102 8 0.37 9 0.037 0.40 \n HM173 X: 780553, Y 6823228, Z: 521, Azimuth: 015, Dip: -58, Depth 285 \n Entire Hole 0 285 285 0.25 11 0.021 0.27 \n Main 8 10 2 0.37 5 0.024 0.39 \n Main 66 74 8 0.77 19 0.034 0.80 \n Including 66 68 2 1.03 31 0.048 1.08 \n Including 70 72 2 0.93 26 0.051 0.97 \n Main 94 124 30 0.30 9 0.024 0.32 \n Including 94 102 8 0.40 8 0.036 0.43 \n Main 176 268 92 0.34 22 0.025 0.36 \n Including 228 232 4 1.03 68 0.068 1.10 \n Including 246 252 6 0.52 21 0.034 0.55 \n HM174 X: 780607, Y 6823420, Z: 549, Azimuth: 011, Dip: -56, Depth 285 \n Entire Hole 0 285 285 0.17 33 0.014 0.19 \n Main 0 64 64 0.29 52 0.021 0.32 \n Including 32 36 4 0.58 46 0.029 0.62 \n Including 60 64 4 0.48 233 0.021 0.58 \n Main 116 138 22 0.30 54 0.021 0.34 \n Main 148 152 4 0.56 533 0.026 0.77 \n HM175 X: 781713, Y 6823187, Z: 438, Azimuth: 009, Dip: -80, Depth 182 \n Entire Hole 0 182 182 0.17 18 0.010 0.18 \n Main 22 30 8 0.80 15 0.027 0.83 \n Including 24 28 4 1.07 22 0.027 1.10 \n Main 40 48 8 0.45 9 0.016 0.47 \n Main 114 120 6 0.30 12 0.013 0.32 \n HM177 X: 782000, Y 6822374, Z: 456, Azimuth: 197, Dip: -83, Depth 414 \n Entire Hole 1 414 413 0.34 49 0.029 0.38 \n Main 8 38 30 1.06 39 0.038 1.10 \n Including 18 22 4 1.23 175 0.076 1.35 \n Including 22 24 2 4.63 15 0.093 4.70 \n Including 32 34 2 4.39 17 0.092 4.46 \n Main 98 118 20 0.27 85 0.023 0.32 \n Main 136 150 14 0.30 41 0.031 0.34 \n Main 190 220 30 0.32 29 0.024 0.35 \n Including 216 220 4 0.56 43 0.047 0.61 \n Main 236 254 18 0.53 44 0.047 0.58 \n Including 244 248 4 1.52 137 0.040 1.60 \n Main 262 326 64 0.43 154 0.044 0.52 \n Including 316 322 6 1.86 1,128 0.200 2.42 \n Main 356 376 20 0.31 17 0.024 0.33 \n Main 400 410 10 1.23 47 0.121 1.33 \n Including 400 402 2 2.00 130 0.134 2.14 \n Including 408 410 2 2.63 26 0.361 2.90 \n HM181 X: 781842, Y 6822060, Z: 554, Azimuth: 197, Dip: -61, Depth 230 \n Entire Hole 0 230 230 0.13 22 0.013 0.15 \n HM185 X: 781033, Y 6823226, Z: 455, Azimuth: 009, Dip: -65, Depth 413 \n Entire Hole 0 413 413 0.37 89 0.022 0.41 \n Main 36 50 14 0.36 46 0.020 0.40 \n Main 156 392 236 0.51 111 0.030 0.57 \n Including 174 180 6 0.72 212 0.038 0.82 \n Including 184 194 10 1.00 108 0.053 1.08 \n Including 202 214 12 0.70 51 0.049 0.75 \n Including 222 230 8 0.63 131 0.031 0.70 \n Including 266 280 14 0.60 61 0.034 0.65 \n Including 336 346 10 0.77 30 0.039 0.81 \n Including 380 386 6 0.68 1,040 0.044 1.09 \n Main 406 413 7 0.25 140 0.015 0.32 \n \n Legend Cu (%) Mo (ppm) Au (g/t) CuEq (%) \n <0.4 <100 <0.10 <0.4 \n 0.4 - 0.5 100 - 200 ≥ 0.10 0.4 - 0.5 \n 0.5 - 0.7 200 - 1,000 0.5 - 0.7 \n 0.7 - 1.0 ≥ 1,000 0.7 - 1.0 \n 1.0 - 3.0 1.0 - 3.0 \n ≥ 3.0 ≥ 3.0 \n1. True widths are unknown. Widths are interval widths and not true widths.\nThe reported intervals are calculated using the following parameters: 1. Only\nCuEq (%) was used to determine the intervals.\n2. The target composite grade is ≥0.30% CuEq.\n3. Composites start and end with samples ≥0.30% CuEq.\n4. Grades between 0.20% and 0.30% are included in interval but generally\nconstitute <40% of the interval.\n5. Consecutive samples between 0.20% and 0.30% should be fewer than 5 samples\n(10m).\n6. Grades below 0.20% are included but generally constitute <20% of the\ninterval.\n7. Consecutive grades <0.2% should be fewer than 2 samples (4m).\n \n2. Mineral Resource (MRE) copper equivalent (CuEq%) values have been\ncalculated using commodity type and price considering the relevant recovery\nrate. The following metal prices were used Cu US$4.54/lb; Mo US$22.68/lb; Au\nUS$4,000/oz along with the following recoveries indicated from test work, Cu\n89%; Mo 65% and Au 50%. The CuEq was then calculated using CuEq = [(Cu\ngrade/100 * 0.89 Cu recovery * 2204.62 * $4.54 Cu price/lb) + (Mo ppm/1000000\n* 0.65 Mo recovery * 2204.62 * $22.68 Mo price/lb) + (Au grade * 0.50 Au\nrecovery * 4000 Au price/oz / 31.1035)] / [0.89 Cu Recovery * 2204.62 * $4.54\nCu price/lb]\n3. Partial results previously reported\nQuality Assurance / Quality Control\n\nAll drill core is HQ sized at collar and reduced to NQ size in fresh rock. The\ncore was all logged, photographed, and cut in half with a diamond saw. Half of\nthe core was bagged and sent to ALS Laboratories Ltd. in Johannesburg, South\nAfrica for analysis (SANAS Accredited Testing Laboratory, No. T0387) and\nActLabs in Canada, while the other half was quartered with one quarter\narchived and stored on site for verification and reference purposes while the\nother quarter will be used for metallurgical test work. 33 elements are\nanalyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion and\ngold is assayed for using a 30g fire assay method. Duplicate samples, blanks,\nand certified standards are included with every batch and are actively used to\nensure proper quality assurance and quality control (“QA/QC”) The QA/QC\nfrequency is 1 in 20 for each of blanks, duplicates and standards. \n\nQualified Persons\n\nMr. Dean Richards, BSc. (Hons) Geology, Pr.Sci.Nat., MGSSA – is the\nQualified Person for the Haib Copper Project and has reviewed and approved the\nscientific and technical information in this news release and is a registered\nProfessional Natural Scientist with the South African Council for Natural\nScientific Professions (Pr.Sci.Nat. No. 400190/08). Mr. Richards is\nindependent of the Company and its mineral properties and is a Qualified\nPerson for the purposes of National Instrument 43-101.\n\nAppointment of Head of Investor Relations\n\nThe Company is also pleased to announce that, subject to TSX Venture Exchange\n(the \"TSXV\") approval, it has entered into an investor relations consulting\nagreement (the \"Agreement\") with Ms. Aideen McDermott to provide investor\nrelations and corporate communications services to the Company. Under the\nAgreement, Ms. McDermott will oversee the Company's investor relations and\ncorporate communications functions. The Agreement has an initial term of 12\nmonths commencing August 1, 2026, under which the Company will pay Ms.\nMcDermott CAD$5,000 per month, with an option to renew monthly, unless\nterminated earlier per its terms. Ms. McDermott is also eligible to receive\nstock options at a later date. The Agreement remains subject to TSXV approval.\n\nBased in Toronto, ON, Ms. McDermott has a strong background in capital markets\nand investor relations, currently providing IR consulting services to junior\nmining companies in gold and copper exploration, as well as technology firms.\nPrior to that, she held roles on the equity sales desks at Beacon Securities\nand BMO Capital Markets.\n\nAbout Koryx Copper S.A.\n\nKoryx Copper S.A. is a Luxembourg domiciled copper development Company focused\non advancing its 100% owned Haib Copper Project in Namibia whilst also\nbuilding a portfolio of copper exploration licenses in Zambia. Haib is a large\ncopper porphyry deposit in southern Namibia with significant gold and\nmolybdenum credits and a long history of exploration and project development\nby multiple operators.\n\nMore than 150,000m of drilling has been conducted at Haib since the 1970’s\nwith significant exploration programs led by companies including Falconbridge\n(1964), Rio Tinto (1975), Teck (2014) and Koryx Copper (2021-2026). Extensive\nfurther drilling, metallurgical testing and various technical studies have\nbeen completed at Haib. Additional studies are underway aiming to demonstrate\nHaib as a future long-life, low-cost, low-risk open pit, sulphide milling and\nflotation copper project with additional heap leach potential.\n\nMineralisation at Haib is typical of a porphyry copper deposit and is\ndominantly chalcopyrite with minor bornite and chalcocite present and only\nminor secondary copper minerals at surface due to the arid environment. Haib\nis one of only a few examples of a Paleoproterozoic porphyry copper deposit in\nthe world. Due to its age, the deposit has been subjected to multiple\nmetamorphic and deformation events but still retains many of the classic\nmineralisation and alteration features typical of these deposits.\n\nFurther details of the Haib Copper Project are available in the technical\nreport titled “March 2026 Mineral Resource Estimate Haib Copper Project,\nNamibia, National Instrument 43-101 Technical Report” dated effective March\n16, 2026. The report and other information are available on the Company's\nwebsite at www.koryxcopper.com and under the Company's profile on SEDAR+ at\nwww.sedarplus.ca.\n\nAdditional information is also available by contacting the Company:\n\nAideen McDermott        \nInvestor Relations \namcdermott@koryxcopper.com\n+1-416-837-7680\n\nNeither the TSX Venture Exchange nor its Regulation Services Provider (as that\nterm is defined in the policies of the TSX Venture Exchange) accepts\nresponsibility for the adequacy or accuracy of this release.\n\nCautionary Statement Regarding Forward-Looking Information\n\nThis press release contains \"forward-looking information\" within the meaning\nof applicable Canadian securities legislation. Forward-looking information\nincludes, without limitation, statements regarding the future or prospects of\nthe Haib project or the Company, including prospective production rates and\nlife-of-mine, the timing of publishing a PFS, the commencement of trading of\nthe Shares under the new Company name, and the effective date of the new CUSIP\nand ISIN assigned to the Shares. Generally, forward-looking information can be\nidentified by the use of forward-looking terminology such as \"plans\",\n\"expects\" or \"does not expect\", \"is expected\", \"budget\", \"scheduled\",\n\"estimates\", \"forecasts\", \"intends\", \"anticipates\" or \"does not anticipate\",\nor \"believes\", or variations of such words and phrases or state that certain\nactions, events or results \"may\", \"could\", \"would\", \"might\" or \"will be\ntaken\", \"occur\" or \"be achieved\". Forward-looking statements are necessarily\nbased upon a number of assumptions that, while considered reasonable by\nmanagement, are inherently subject to business, market, and economic risks,\nuncertainties, and contingencies that may cause actual results, performance,\nor achievements to be materially different from those expressed or implied by\nforward-looking statements. Although the Company has attempted to identify\nimportant factors that could cause actual results to differ materially from\nthose contained in forward-looking information, other factors may cause\nresults not to be as anticipated, estimated, or intended. There can be no\nassurance that such information will prove to be accurate, as actual results\nand future events could differ materially from those anticipated in such\nstatements. Accordingly, readers should not place undue reliance on\nforward-looking information. Other factors which could materially affect such\nforward-looking information are described in the risk factors in the Company's\nmost recent annual management discussion and analysis. The Company does not\nundertake to update any forward-looking information, except in accordance with\napplicable securities laws.\n\nPhotos accompanying this announcement are available at\n\nhttps://www.globenewswire.com/NewsRoom/AttachmentNg/5a2eacfc-32d0-41ff-84e3-143006d616de\n\nhttps://www.globenewswire.com/NewsRoom/AttachmentNg/357797ee-bcf0-4161-9d9e-4b13f79affaf\n\n(https://www.globenewswire.com/NewsRoom/AttachmentNg/0e99cc78-b80a-4380-a212-35e3ef8b9801)\nFigure 1 \n(https://www.globenewswire.com/NewsRoom/AttachmentNg/5a2eacfc-32d0-41ff-84e3-143006d616de/en)\nPlan view indicating recent drill hole locations. Results indicated in black\nare shown on the long section below Figure 2 \n(https://www.globenewswire.com/NewsRoom/AttachmentNg/357797ee-bcf0-4161-9d9e-4b13f79affaf/en)\nLong section showing seventeen drillhole intersections relative to the model\nfor CuEq% Intercepts\n\n\nGlobeNewswire, Inc. 2026","article_body_html":"","raw_payload":{"data":{"id":"nGNX6T9wkc","title":"Koryx Copper Announces Further Drill Results at the Haib Copper Project in Southern Namibia","author":"Globe Newswire","ticker":"LI6","created":"2026-08-26T11:00:02.953Z","tickers":["LI6"],"exchange":"","article_body":"Highlights \n* Assay results reported for 19 drill holes comprising over 8,586m of infill\ndrilling.\n* Consistent, wide intercepts up to 969m in width, including 236m @ 0.57%\nCuEq.\n* High-grade mineralisation from surface in HM177, including 30m @ 1.10% CuEq.\n* All 19 holes intersected thick mineralisation including multiple intercepts\nabove average MRE grade.\n* Best 6 of 19 drill hole assay intersections as follows: * HM185:\n        413m @ 0.41% CuEq (89ppm Mo, 0.022g/t Au) (0 – 413m)\nincl.      236m @ 0.57% CuEq (156 – 392m)\n* * HM177:         413m @ 0.38% CuEq (49ppm Mo, 0.029g/t Au) (1 –\n414m)\nincl.      30m @ 1.10% CuEq (8 – 38m)\nand       18m @ 0.58% CuEq (236 – 254m)\nand       10m @ 1.33% CuEq (400 – 410m)\n* * HM168:         728m @ 0.32% CuEq (103ppm Mo, 0.027g/t Au) (1 –\n729m)\nincl.      40m @ 0.60% CuEq (288 – 328m)\nand       50m @ 0.51% CuEq (554 – 604m)\nand       72m @ 0.36% CuEq (620 – 692m)\n* * HM165:         600m @ 0.30% CuEq (35ppm Mo, 0.023g/t Au) (0 –\n600m)\nincl.      78m @ 0.43% CuEq (98 – 176m)\nand       54m @ 0.46% CuEq (270 – 324m)\nand       48m @ 0.48% CuEq (368 – 416m)\n* * HM164:         855m @ 0.28% CuEq (108ppm Mo, 0.017g/t Au) (0 –\n855m)\nincl.      110m @ 0.50% CuEq (250 – 360m)\nand       12m @ 0.41% CuEq (368 – 380m)\nand       48m @ 0.52% CuEq (592 – 640m)\n* * HM167:         969m @ 0.27% CuEq (84ppm Mo, 0.021g/t Au) (0 –\n969m)\nincl.      18m @ 0.48% CuEq (268 – 286m)\nand       58m @ 0.45% CuEq (550 – 608m)\nand       28m @ 0.42% CuEq (788 – 816m)\n\nLUXEMBOURG, Aug. 26, 2026 (GLOBE NEWSWIRE) -- Koryx Copper S.A. (TSX:KRY.V)\n(NSX:KYX) (OTCQX:KRYXF) (“Koryx” or the \"Company\") is pleased to announce\nassay results from 19 drill holes (8,586m) received as part of the ongoing\ninfill and expansion drill program on the wholly-owned Haib Copper Project\n(“Haib” or the “Project”) in southern Namibia. Haib is a massive,\ndisseminated porphyry Cu deposit with associated Mo and Au and is envisaged to\nproduce a Cu and Mo concentrate via large-scale open pit mining and\nconventional sulphide milling and flotation.\n\nHeye Daun, Koryx Copper’s President & CEO commented: “These results\ncontinue the trend of recent months, with exceptional widths at consistent and\nregular higher grades above the average MRE grade. HM167 returned 969m at\n0.27% CuEq from surface, which is our longest mineralised intersection at Haib\nto date. HM185 delivered 236m at 0.57% CuEq and HM177 returned 30m at 1.10%\nCuEq from only 8m depth again demonstrating the high-grade potential of the\nsystem. With this batch, our infill drilling is nearing completion, and\nresults continue to trend to the upside ahead of the expected late 2026\nmineral resource update.”\n\nInfill and Expansion Drill Results\n\nTarget Area 1:\n\nHM160 was drilled along the eastern edge of Target 1, results in the upper\nportion of the hole correlate well with the existing model. While higher\ngrades were anticipated at depth, the intersections returned are significantly\nwider and higher grade than expected, including 74m at 0.54% Cu, comprising 6m\nat 1.36% Cu (0.36g/t Au), and a further 8m at 1.69% Cu. Tungsten (W) was\nencountered at elevated grades over two 2m intervals, returning 994ppm and\n313ppm respectively. Mo grades are very low across the full length of the\nhole.\n\nHM169 is located north of the Volstruis River, results confirm the down-dip\nextension of mineralization in this area and correlate well with the current\nmodel. Consistent with the broader trend in this area, Mo grades remain very\nlow (<20ppm), while two 2m intervals returned 0.13g/t and 0.28g/t Au.\n\nHM170 was drilled in the south of Target 1, results indicate that higher-grade\nCu mineralization extends further south than currently modelled. Cu is well\ndeveloped over the first 164m of the hole, including 24m at 0.35% Cu and 56m\nat 0.38% Cu, with several intervals exceeding 0.5% Cu. Mo grades are low but\nincrease with depth, and gold is present, with two 2m intervals exceeding\n0.1g/t Au.\n\nHM177 is located in the centre of Target 1, this infill hole is spatially\nconsistent with the model but returned grades significantly higher than\nexpected. A 30m intersection from 8m downhole averaging 1.06% Cu is\nexceptional, containing two 2m intervals grading over 4% Cu — among the\nhighest grades returned to date at Haib. At depth, a 64m interval averaged\n0.43% Cu, including 6m at 1.86% Cu with 1,128ppm Mo, and deeper still a\nfurther 10m interval averaged 1.23% Cu, including two intervals grading over\n2% Cu. Gold grades increase from 252m downhole, including 4m at 0.27g/t Au\n(316m downhole) and 2m at 0.36g/t Au (408m downhole). Sporadic W is present at\nhigh grades to 116m downhole, and a 4m interval returned 10g/t silver (Ag) at\n316m downhole.\n\nHM181 was drilled in the south of Target 1 to better define the spatial limits\nof mineralization, this hole returned very low grades across all metals (Cu,\nMo, Au) for its full length, confirming that it lies outside Target 1\nmineralization.\n\nTarget Area 2:\n\nHM159 was drilled near the Quartz Vein that separates Target 1 and Target 2,\nintersecting it approximately 142m downhole, Cu results are consistent with\nexpectations. In the deeper portion of the hole, W is well developed,\nreturning 6m at 751ppm (574m downhole) and 30m at 139ppm W (604m downhole). Mo\ngrades increase from 250m downhole.\n\nHM164 is located in the southwest of Target 2, this infill hole returned Cu\ngrades consistent with expectations. Mo grades to approximately 800m downhole\nare strong, materially improving the Cu-equivalent grade over this interval.\n\nHM165 was drilled on the same section line as HM159, this hole begins in\nTarget 1 mineralization before passing through the Quartz Vein into Target 2.\nCu grades are lower than modelled between 36m and 74m downhole but are\notherwise consistent with expectations. Mo grades are elevated between 186m\nand 314m downhole but low elsewhere. W occurs in multiple >10m intervals\ngrading above 100ppm within the upper 294m of the hole, the widest being 12m\nat 192ppm and 18m at 118ppm. Gold grades are very low throughout.\n\n\n\nFigure 1: Plan view indicating recent drill hole locations. Results indicated\nin black are shown on the long section below\n\n\n\nFigure 2. Long section showing seventeen drillhole intersections relative to\nthe model for CuEq% Intercepts\n\nHM167 is located 70m west of HM159 and HM165, this hole remains within Target\n2 mineralization for its full length despite deviating eastwards at depth. Cu\ngrades correlate well with the current model, while Mo grades are notably\nhigher and a significant contributor to CuEq grades. Gold grades are low, and\nW occurs sporadically in 2m intervals above 100ppm throughout the hole.\n\nHM168 was drilled 60m north of HM167 along the same section line, this infill\nhole returned excellent Cu results consistent with the current model. Mo\ngrades are again very high, though in places associated with low Cu grades —\nfor example, averaging 507ppm Mo against only 0.16% Cu between 392m and 426m\ndownhole. Gold is present, with 2m at 2.58g/t Au (596m downhole) and 2m at\n0.46g/t Au (594m downhole).\n\nHM171 was drilled in the north of Target 2, as expected this hole intersected\nthe Cu-depleted East-West Fault Zone that separates Targets 2 and 3. Notably,\nthe upper, higher-grade zones intersected lie outside the current resource\nmodel and represent potential for a significant tonnage gain. Mo and gold\ngrades are very low, consistent with this area.\n\nHM175 is located 35m east of HM171, Cu results correlate well with the\nexisting model and may support a marginal tonnage gain. As expected, Mo and\ngold grades are very low.\n\nTarget Area 3:\n\nHM150 was drilled in the south of Target 3, Cu results are consistent with\nexpectations. Mo grades are generally elevated but often associated with\nlower-grade Cu (<0.20% Cu). Gold is practically absent.\n\nHM166 is located in the west of Target 3, where higher-grade mineralization\noccurs across multiple, steeply dipping, parallel zones, Cu results reflect\nthis trend and correlate with the current model. Mo grades are good,\nsupplementing the Cu-equivalent grade throughout, while gold remains low.\n\nHM173 is positioned on the western edge of Target 3, results confirm that\nhigher-grade Cu mineralization extends further west than modelled. The deeper\nintervals (30m at 0.30% Cu (94m downhole) and 92m at 0.34% Cu (176m downhole))\nboth lie outside the current model and represent potential for a significant\ntonnage gain in this region. Mo and gold grades are low throughout.\n\nHM174 was drilled 200m north of HM173 on the same section line, Cu results\ncorrelate well with the existing model. Mo grades can be locally strong\n(>100ppm), but these intervals are narrow and sporadic. Gold grades are low\nthroughout.\n\nHM185 was drilled into the centre of Target 3 mineralization, this infill hole\nreturned exceptional results consistent with the current model. Mo occurs at\nhigh levels throughout, though not always associated with higher-grade Cu. The\nreported 236m averaging 0.51% Cu (0.57% CuEq) is among the best intersections\nreturned to date at Haib in terms of contained metal, comprising numerous wide\nintervals above 0.6% Cu, including 10m at 1.00% Cu. W is present at\nconcentrations above 100ppm, though these intervals are narrow and sporadic.\n\nTarget Area 4:\n\nHM162 is collared well south of Target 4 and drilled northward into the\ntarget, this hole's higher-grade deep intersections correlate well with the\ndown-dip projection of known Target 4 mineralization. Notably, 56m at 0.35% Cu\n(124m downhole) represents entirely new Cu mineralization; while its extent is\nnot yet fully defined, this area represents a future resource-expansion\ntarget. Mo and gold grades are low throughout, although sporadic 2m W\nintervals above 200ppm were intersected.\n\nHM172 was drilled in the far south of Target 4, 8m at 0.37% Cu confirms the\npresence of, and tightens the drill spacing on, the higher-grade Cu zone\npreviously intersected in historical boreholes HB089 and HB091 in this region.\nMo and gold grades are low throughout.\n\nTable of Significant Intersections\n\n Hole# Zone From (m) To (m) Width (m)1 Cu (%) Mo (ppm) Au (g/t) CuEq (%)2 \n HM150 X: 780782, Y 6823212, Z: 481, Azimuth: 017, Dip: -74, Depth 387 \n Entire Hole 0 387 387 0.20 48 0.012 0.23 \n Main 48 54 6 0.28 48 0.009 0.30 \n Main 84 90 6 0.38 19 0.016 0.40 \n Main 96 122 26 0.32 34 0.016 0.34 \n Including 106 112 6 0.55 84 0.027 0.60 \n Main 134 144 10 0.40 67 0.020 0.43 \n Including 140 142 2 1.02 179 0.055 1.12 \n Main 238 310 72 0.30 50 0.013 0.33 \n Including 280 288 8 0.71 10 0.012 0.72 \n HM159 X: 781669, Y 6822282, Z: 573, Azimuth: 019, Dip: -79, Depth 672 \n Entire Hole 0 672 672 0.19 79 0.014 0.23 \n Main 66 136 70 0.30 82 0.019 0.35 \n Including 118 124 6 0.93 59 0.036 0.97 \n Including 130 136 6 0.41 81 0.021 0.46 \n Main 260 268 8 0.28 133 0.015 0.34 \n Main 384 432 48 0.32 102 0.015 0.37 \n Including 416 428 12 0.50 203 0.023 0.59 \n Main 556 586 30 0.28 235 0.025 0.38 \n Including 572 580 8 0.50 219 0.040 0.60 \n HM160 X: 782145, Y 6822353, Z: 413, Azimuth: 228, Dip: -82, Depth 443 \n Entire Hole 0 443 443 0.23 43 0.018 0.26 \n Main 268 270 2 0.89 452 0.105 1.13 \n Main 290 364 74 0.54 83 0.055 0.61 \n Including 296 302 6 1.36 43 0.364 1.64 \n Including 316 324 8 1.69 38 0.050 1.74 \n Including 324 332 8 0.65 144 0.042 0.74 \n Including 356 360 4 0.66 36 0.061 0.71 \n Main 404 410 6 0.36 48 0.024 0.39 \n HM162 X: 780888, Y 6822546, Z: 532, Azimuth: 020, Dip: -62, Depth 517 \n Entire Hole 0 577 577 0.19 45 0.007 0.21 \n Main 124 180 56 0.35 49 0.017 0.38 \n Including 166 176 10 0.50 68 0.018 0.54 \n Main 324 350 26 0.38 28 0.019 0.40 \n Main 364 374 10 0.34 18 0.024 0.36 \n HM164 X: 781346, Y 6822559, Z: 495, Azimuth: 025, Dip: -60, Depth 855 \n Entire Hole 0 855 855 0.23 108 0.017 0.28 \n Main 34 50 16 0.24 211 0.016 0.32 \n Including 48 50 2 0.16 1,195 0.011 0.61 \n Main 70 84 14 0.27 238 0.015 0.37 \n Main 112 116 4 0.74 30 0.065 0.80 \n Main 186 198 12 0.24 151 0.016 0.31 \n Main 250 360 110 0.36 333 0.025 0.50 \n Including 288 308 20 0.54 369 0.046 0.71 \n Including 336 342 6 0.45 1,049 0.024 0.85 \n Including 350 352 2 0.61 1,965 0.017 1.34 \n Main 368 380 12 0.18 597 0.023 0.41 \n Main 522 528 6 0.39 37 0.030 0.42 \n Main 546 552 6 0.37 48 0.022 0.40 \n Main 592 640 48 0.46 98 0.029 0.52 \n Including 620 628 8 0.59 278 0.033 0.72 \n Main 652 692 40 0.30 76 0.023 0.35 \n Including 658 666 8 0.44 149 0.030 0.51 \n Main 750 808 58 0.31 56 0.022 0.35 \n Including 776 782 6 0.40 175 0.048 0.50 \n Including 798 800 2 0.80 94 0.028 0.86 \n Main 832 846 14 0.27 59 0.016 0.31 \n HM165 X: 781700, Y 6822453, Z: 511, Azimuth: 011, Dip: -85, Depth 600 \n Entire Hole 0 600 600 0.27 35 0.023 0.30 \n Main 72 84 12 0.33 13 0.029 0.36 \n Main 98 176 78 0.41 14 0.024 0.43 \n Including 98 102 4 0.75 13 0.021 0.77 \n Including 116 128 12 0.58 41 0.042 0.63 \n Including 142 148 6 0.64 22 0.035 0.67 \n Including 170 176 6 0.53 6 0.031 0.55 \n Main 218 260 42 0.26 157 0.010 0.32 \n Including 250 254 4 0.38 664 0.015 0.63 \n Main 270 324 54 0.41 60 0.031 0.46 \n Including 300 314 14 0.77 72 0.050 0.83 \n Main 368 416 48 0.44 36 0.030 0.48 \n Including 378 380 2 0.92 46 0.052 0.97 \n Including 390 396 6 0.55 39 0.028 0.58 \n Main 488 492 4 0.82 36 0.030 0.86 \n HM166 X: 780703, Y 6823188, Z: 486, Azimuth: 021, Dip: -54, Depth 455 \n Entire Hole 0 455 455 0.20 61 0.013 0.24 \n Main 54 66 12 0.30 18 0.012 0.31 \n Main 76 84 8 0.30 88 0.013 0.34 \n Main 92 106 14 0.28 57 0.017 0.31 \n Main 122 126 4 0.51 9 0.023 0.53 \n Main 140 150 10 0.65 177 0.017 0.72 \n Including 140 144 4 1.21 6 0.015 1.22 \n Main 184 196 12 0.26 113 0.016 0.31 \n Main 250 282 32 0.29 97 0.014 0.33 \n Including 250 254 4 0.44 58 0.019 0.47 \n Including 264 270 6 0.37 306 0.013 0.49 \n Main 436 454 18 0.24 337 0.019 0.38 \n Including 438 440 2 0.45 2,440 0.046 1.37 \n HM167 X: 781610, Y 6822344, Z: 539, Azimuth: 033, Dip: -69, Depth 969 \n Entire Hole 0 969 969 0.23 84 0.021 0.27 \n Main 190 204 14 0.29 23 0.026 0.32 \n Main 216 240 24 0.34 99 0.037 0.41 \n Including 230 236 6 0.51 254 0.061 0.64 \n Main 268 286 18 0.38 189 0.034 0.48 \n Including 270 272 2 0.95 169 0.063 1.06 \n Including 282 284 2 0.53 780 0.037 0.84 \n Main 308 318 10 0.27 186 0.022 0.35 \n Main 388 398 10 0.29 35 0.023 0.32 \n Main 450 536 86 0.25 117 0.027 0.31 \n Including 508 516 8 0.37 25 0.032 0.41 \n Including 526 528 2 0.71 19 0.049 0.75 \n Including 534 536 2 0.03 2,710 0.027 1.04 \n Main 550 608 58 0.34 263 0.021 0.45 \n Main 674 694 20 0.25 236 0.026 0.36 \n Including 680 684 4 0.29 717 0.033 0.58 \n Main 724 738 14 0.34 19 0.028 0.37 \n Including 726 730 4 0.52 39 0.034 0.56 \n Main 788 816 28 0.39 42 0.026 0.42 \n Including 810 816 6 0.63 39 0.036 0.67 \n Main 846 932 86 0.32 197 0.025 0.41 \n Including 858 866 8 0.34 658 0.022 0.60 \n Including 870 884 14 0.39 371 0.026 0.55 \n Including 886 898 12 0.39 120 0.026 0.45 \n Including 904 906 2 1.03 70 0.067 1.10 \n Including 914 922 8 0.39 115 0.027 0.45 \n HM168 X: 781623, Y 6822428, Z: 495, Azimuth: 020, Dip: -63, Depth 729 \n Entire Hole 1 729 728 0.26 103 0.027 0.32 \n Main 62 70 8 0.31 63 0.019 0.35 \n Main 124 156 32 0.25 169 0.018 0.33 \n Main 170 178 8 0.39 216 0.025 0.49 \n Main 288 328 40 0.51 197 0.027 0.60 \n Including 294 302 8 1.02 52 0.042 1.07 \n Main 332 340 8 0.42 146 0.023 0.49 \n Main 358 386 28 0.29 153 0.017 0.36 \n Main 394 526 132 0.26 221 0.018 0.35 \n Including 404 416 12 0.14 878 0.020 0.48 \n Including 424 438 14 0.31 492 0.019 0.50 \n Including 452 468 16 0.34 151 0.022 0.41 \n Main 486 548 62 0.27 87 0.018 0.31 \n Main 554 604 50 0.35 158 0.143 0.51 \n Including 582 586 4 0.67 69 0.033 0.71 \n Including 594 604 10 0.44 82 0.621 0.92 \n Main 620 692 72 0.33 55 0.024 0.36 \n Including 622 626 4 0.72 11 0.036 0.75 \n Including 656 658 2 0.94 40 0.084 1.01 \n Including 682 688 6 0.43 85 0.027 0.48 \n Main 706 729 23 0.32 53 0.019 0.35 \n Including 708 716 8 0.46 57 0.026 0.50 \n HM169 X: 782013, Y 6822830, Z: 405, Azimuth: 186, Dip: -68, Depth 320 \n Entire Hole 0 320 320 0.16 9 0.028 0.19 \n Main 140 152 12 0.65 15 0.049 0.69 \n Including 142 146 4 1.14 12 0.061 1.19 \n Main 166 178 12 0.32 8 0.063 0.37 \n Main 198 204 6 0.27 15 0.052 0.32 \n Main 300 320 20 0.29 3 0.033 0.31 \n HM170 X: 782042, Y 6822245, Z: 437, Azimuth: 198, Dip: -64, Depth 314 \n Entire Hole 0 314 314 0.22 39 0.030 0.25 \n Main 2 10 8 0.35 72 0.063 0.43 \n Main 34 38 4 0.64 56 0.048 0.70 \n Main 74 98 24 0.35 21 0.037 0.38 \n Including 88 90 2 0.96 20 0.047 1.00 \n Main 108 164 56 0.38 19 0.034 0.41 \n Including 122 124 2 1.29 14 0.042 1.33 \n Including 130 138 8 0.58 35 0.043 0.63 \n Including 158 162 4 1.03 22 0.040 1.07 \n Main 254 258 4 0.28 255 0.030 0.39 \n Main 298 302 4 0.33 562 0.061 0.58 \n HM171 X: 781618, Y 6823145, Z: 429, Azimuth: 016, Dip: -59, Depth 312 \n Entire Hole 0 312 312 0.21 20 0.012 0.22 \n Main 10 54 44 0.39 34 0.015 0.41 \n Including 30 48 18 0.48 42 0.015 0.51 \n Main 92 158 66 0.30 11 0.015 0.32 \n Including 92 102 10 0.48 16 0.018 0.50 \n HM172 X: 780713, Y 6822471, Z: 557, Azimuth: 009, Dip: -73, Depth 150 \n Entire Hole 1 150 149 0.14 10 0.020 0.16 \n Main 94 102 8 0.37 9 0.037 0.40 \n HM173 X: 780553, Y 6823228, Z: 521, Azimuth: 015, Dip: -58, Depth 285 \n Entire Hole 0 285 285 0.25 11 0.021 0.27 \n Main 8 10 2 0.37 5 0.024 0.39 \n Main 66 74 8 0.77 19 0.034 0.80 \n Including 66 68 2 1.03 31 0.048 1.08 \n Including 70 72 2 0.93 26 0.051 0.97 \n Main 94 124 30 0.30 9 0.024 0.32 \n Including 94 102 8 0.40 8 0.036 0.43 \n Main 176 268 92 0.34 22 0.025 0.36 \n Including 228 232 4 1.03 68 0.068 1.10 \n Including 246 252 6 0.52 21 0.034 0.55 \n HM174 X: 780607, Y 6823420, Z: 549, Azimuth: 011, Dip: -56, Depth 285 \n Entire Hole 0 285 285 0.17 33 0.014 0.19 \n Main 0 64 64 0.29 52 0.021 0.32 \n Including 32 36 4 0.58 46 0.029 0.62 \n Including 60 64 4 0.48 233 0.021 0.58 \n Main 116 138 22 0.30 54 0.021 0.34 \n Main 148 152 4 0.56 533 0.026 0.77 \n HM175 X: 781713, Y 6823187, Z: 438, Azimuth: 009, Dip: -80, Depth 182 \n Entire Hole 0 182 182 0.17 18 0.010 0.18 \n Main 22 30 8 0.80 15 0.027 0.83 \n Including 24 28 4 1.07 22 0.027 1.10 \n Main 40 48 8 0.45 9 0.016 0.47 \n Main 114 120 6 0.30 12 0.013 0.32 \n HM177 X: 782000, Y 6822374, Z: 456, Azimuth: 197, Dip: -83, Depth 414 \n Entire Hole 1 414 413 0.34 49 0.029 0.38 \n Main 8 38 30 1.06 39 0.038 1.10 \n Including 18 22 4 1.23 175 0.076 1.35 \n Including 22 24 2 4.63 15 0.093 4.70 \n Including 32 34 2 4.39 17 0.092 4.46 \n Main 98 118 20 0.27 85 0.023 0.32 \n Main 136 150 14 0.30 41 0.031 0.34 \n Main 190 220 30 0.32 29 0.024 0.35 \n Including 216 220 4 0.56 43 0.047 0.61 \n Main 236 254 18 0.53 44 0.047 0.58 \n Including 244 248 4 1.52 137 0.040 1.60 \n Main 262 326 64 0.43 154 0.044 0.52 \n Including 316 322 6 1.86 1,128 0.200 2.42 \n Main 356 376 20 0.31 17 0.024 0.33 \n Main 400 410 10 1.23 47 0.121 1.33 \n Including 400 402 2 2.00 130 0.134 2.14 \n Including 408 410 2 2.63 26 0.361 2.90 \n HM181 X: 781842, Y 6822060, Z: 554, Azimuth: 197, Dip: -61, Depth 230 \n Entire Hole 0 230 230 0.13 22 0.013 0.15 \n HM185 X: 781033, Y 6823226, Z: 455, Azimuth: 009, Dip: -65, Depth 413 \n Entire Hole 0 413 413 0.37 89 0.022 0.41 \n Main 36 50 14 0.36 46 0.020 0.40 \n Main 156 392 236 0.51 111 0.030 0.57 \n Including 174 180 6 0.72 212 0.038 0.82 \n Including 184 194 10 1.00 108 0.053 1.08 \n Including 202 214 12 0.70 51 0.049 0.75 \n Including 222 230 8 0.63 131 0.031 0.70 \n Including 266 280 14 0.60 61 0.034 0.65 \n Including 336 346 10 0.77 30 0.039 0.81 \n Including 380 386 6 0.68 1,040 0.044 1.09 \n Main 406 413 7 0.25 140 0.015 0.32 \n \n Legend Cu (%) Mo (ppm) Au (g/t) CuEq (%) \n <0.4 <100 <0.10 <0.4 \n 0.4 - 0.5 100 - 200 ≥ 0.10 0.4 - 0.5 \n 0.5 - 0.7 200 - 1,000 0.5 - 0.7 \n 0.7 - 1.0 ≥ 1,000 0.7 - 1.0 \n 1.0 - 3.0 1.0 - 3.0 \n ≥ 3.0 ≥ 3.0 \n1. True widths are unknown. Widths are interval widths and not true widths.\nThe reported intervals are calculated using the following parameters: 1. Only\nCuEq (%) was used to determine the intervals.\n2. The target composite grade is ≥0.30% CuEq.\n3. Composites start and end with samples ≥0.30% CuEq.\n4. Grades between 0.20% and 0.30% are included in interval but generally\nconstitute <40% of the interval.\n5. Consecutive samples between 0.20% and 0.30% should be fewer than 5 samples\n(10m).\n6. Grades below 0.20% are included but generally constitute <20% of the\ninterval.\n7. Consecutive grades <0.2% should be fewer than 2 samples (4m).\n \n2. Mineral Resource (MRE) copper equivalent (CuEq%) values have been\ncalculated using commodity type and price considering the relevant recovery\nrate. The following metal prices were used Cu US$4.54/lb; Mo US$22.68/lb; Au\nUS$4,000/oz along with the following recoveries indicated from test work, Cu\n89%; Mo 65% and Au 50%. The CuEq was then calculated using CuEq = [(Cu\ngrade/100 * 0.89 Cu recovery * 2204.62 * $4.54 Cu price/lb) + (Mo ppm/1000000\n* 0.65 Mo recovery * 2204.62 * $22.68 Mo price/lb) + (Au grade * 0.50 Au\nrecovery * 4000 Au price/oz / 31.1035)] / [0.89 Cu Recovery * 2204.62 * $4.54\nCu price/lb]\n3. Partial results previously reported\nQuality Assurance / Quality Control\n\nAll drill core is HQ sized at collar and reduced to NQ size in fresh rock. The\ncore was all logged, photographed, and cut in half with a diamond saw. Half of\nthe core was bagged and sent to ALS Laboratories Ltd. in Johannesburg, South\nAfrica for analysis (SANAS Accredited Testing Laboratory, No. T0387) and\nActLabs in Canada, while the other half was quartered with one quarter\narchived and stored on site for verification and reference purposes while the\nother quarter will be used for metallurgical test work. 33 elements are\nanalyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion and\ngold is assayed for using a 30g fire assay method. Duplicate samples, blanks,\nand certified standards are included with every batch and are actively used to\nensure proper quality assurance and quality control (“QA/QC”) The QA/QC\nfrequency is 1 in 20 for each of blanks, duplicates and standards. \n\nQualified Persons\n\nMr. Dean Richards, BSc. (Hons) Geology, Pr.Sci.Nat., MGSSA – is the\nQualified Person for the Haib Copper Project and has reviewed and approved the\nscientific and technical information in this news release and is a registered\nProfessional Natural Scientist with the South African Council for Natural\nScientific Professions (Pr.Sci.Nat. No. 400190/08). Mr. Richards is\nindependent of the Company and its mineral properties and is a Qualified\nPerson for the purposes of National Instrument 43-101.\n\nAppointment of Head of Investor Relations\n\nThe Company is also pleased to announce that, subject to TSX Venture Exchange\n(the \"TSXV\") approval, it has entered into an investor relations consulting\nagreement (the \"Agreement\") with Ms. Aideen McDermott to provide investor\nrelations and corporate communications services to the Company. Under the\nAgreement, Ms. McDermott will oversee the Company's investor relations and\ncorporate communications functions. The Agreement has an initial term of 12\nmonths commencing August 1, 2026, under which the Company will pay Ms.\nMcDermott CAD$5,000 per month, with an option to renew monthly, unless\nterminated earlier per its terms. Ms. McDermott is also eligible to receive\nstock options at a later date. The Agreement remains subject to TSXV approval.\n\nBased in Toronto, ON, Ms. McDermott has a strong background in capital markets\nand investor relations, currently providing IR consulting services to junior\nmining companies in gold and copper exploration, as well as technology firms.\nPrior to that, she held roles on the equity sales desks at Beacon Securities\nand BMO Capital Markets.\n\nAbout Koryx Copper S.A.\n\nKoryx Copper S.A. is a Luxembourg domiciled copper development Company focused\non advancing its 100% owned Haib Copper Project in Namibia whilst also\nbuilding a portfolio of copper exploration licenses in Zambia. Haib is a large\ncopper porphyry deposit in southern Namibia with significant gold and\nmolybdenum credits and a long history of exploration and project development\nby multiple operators.\n\nMore than 150,000m of drilling has been conducted at Haib since the 1970’s\nwith significant exploration programs led by companies including Falconbridge\n(1964), Rio Tinto (1975), Teck (2014) and Koryx Copper (2021-2026). Extensive\nfurther drilling, metallurgical testing and various technical studies have\nbeen completed at Haib. Additional studies are underway aiming to demonstrate\nHaib as a future long-life, low-cost, low-risk open pit, sulphide milling and\nflotation copper project with additional heap leach potential.\n\nMineralisation at Haib is typical of a porphyry copper deposit and is\ndominantly chalcopyrite with minor bornite and chalcocite present and only\nminor secondary copper minerals at surface due to the arid environment. Haib\nis one of only a few examples of a Paleoproterozoic porphyry copper deposit in\nthe world. Due to its age, the deposit has been subjected to multiple\nmetamorphic and deformation events but still retains many of the classic\nmineralisation and alteration features typical of these deposits.\n\nFurther details of the Haib Copper Project are available in the technical\nreport titled “March 2026 Mineral Resource Estimate Haib Copper Project,\nNamibia, National Instrument 43-101 Technical Report” dated effective March\n16, 2026. The report and other information are available on the Company's\nwebsite at www.koryxcopper.com and under the Company's profile on SEDAR+ at\nwww.sedarplus.ca.\n\nAdditional information is also available by contacting the Company:\n\nAideen McDermott        \nInvestor Relations \namcdermott@koryxcopper.com\n+1-416-837-7680\n\nNeither the TSX Venture Exchange nor its Regulation Services Provider (as that\nterm is defined in the policies of the TSX Venture Exchange) accepts\nresponsibility for the adequacy or accuracy of this release.\n\nCautionary Statement Regarding Forward-Looking Information\n\nThis press release contains \"forward-looking information\" within the meaning\nof applicable Canadian securities legislation. Forward-looking information\nincludes, without limitation, statements regarding the future or prospects of\nthe Haib project or the Company, including prospective production rates and\nlife-of-mine, the timing of publishing a PFS, the commencement of trading of\nthe Shares under the new Company name, and the effective date of the new CUSIP\nand ISIN assigned to the Shares. Generally, forward-looking information can be\nidentified by the use of forward-looking terminology such as \"plans\",\n\"expects\" or \"does not expect\", \"is expected\", \"budget\", \"scheduled\",\n\"estimates\", \"forecasts\", \"intends\", \"anticipates\" or \"does not anticipate\",\nor \"believes\", or variations of such words and phrases or state that certain\nactions, events or results \"may\", \"could\", \"would\", \"might\" or \"will be\ntaken\", \"occur\" or \"be achieved\". Forward-looking statements are necessarily\nbased upon a number of assumptions that, while considered reasonable by\nmanagement, are inherently subject to business, market, and economic risks,\nuncertainties, and contingencies that may cause actual results, performance,\nor achievements to be materially different from those expressed or implied by\nforward-looking statements. Although the Company has attempted to identify\nimportant factors that could cause actual results to differ materially from\nthose contained in forward-looking information, other factors may cause\nresults not to be as anticipated, estimated, or intended. There can be no\nassurance that such information will prove to be accurate, as actual results\nand future events could differ materially from those anticipated in such\nstatements. Accordingly, readers should not place undue reliance on\nforward-looking information. Other factors which could materially affect such\nforward-looking information are described in the risk factors in the Company's\nmost recent annual management discussion and analysis. The Company does not\nundertake to update any forward-looking information, except in accordance with\napplicable securities laws.\n\nPhotos accompanying this announcement are available at\n\nhttps://www.globenewswire.com/NewsRoom/AttachmentNg/5a2eacfc-32d0-41ff-84e3-143006d616de\n\nhttps://www.globenewswire.com/NewsRoom/AttachmentNg/357797ee-bcf0-4161-9d9e-4b13f79affaf\n\n(https://www.globenewswire.com/NewsRoom/AttachmentNg/0e99cc78-b80a-4380-a212-35e3ef8b9801)\nFigure 1 \n(https://www.globenewswire.com/NewsRoom/AttachmentNg/5a2eacfc-32d0-41ff-84e3-143006d616de/en)\nPlan view indicating recent drill hole locations. Results indicated in black\nare shown on the long section below Figure 2 \n(https://www.globenewswire.com/NewsRoom/AttachmentNg/357797ee-bcf0-4161-9d9e-4b13f79affaf/en)\nLong section showing seventeen drillhole intersections relative to the model\nfor CuEq% Intercepts\n\n\nGlobeNewswire, Inc. 2026"},"type":"article","timestamp":"2026-08-26T11:00:03.372206375Z","server_sent_at_ms":1787742003372},"received_at":"2026-08-26T11:00:03.422Z","source_url":"https://www.globenewswire.com/news-release/2026/08/26/3351206/0/en/koryx-copper-announces-further-drill-results-at-the-haib-copper-project-in-southern-namibia.html"},"analysis":{"id":"116882","press_release_id":"127964","analysis_json":{"industry":{"label":"Metals & Mining","sector":"Materials"},"redFlags":[],"eventType":"operations_update","narrative":"Koryx Copper reported assay results from 19 drill holes totaling 8,586 meters at its wholly-owned Haib Copper Project, confirming wide intercepts and consistent high-grade mineralization.\n\nKey intersections included HM167, which returned 969 meters at 0.27% CuEq from surface—the longest intercept to date—along with significant high-grade zones in HM177 and HM185 that exceeded average model grades.\n\nThe company also appointed Aideen McDermott as Head of Investor Relations, subject to TSXV approval, under an agreement paying CAD$5,000 per month.","sentiment":"bullish","agentHooks":{"shouldPost":false,"suggestedAngle":"Drill results at Haib continue to show exceptional widths and grades, reinforcing the project's scale."},"keyFigures":{"customDimensions":{"drill_holes":19,"drill_meters":8586,"intercept_hm167":"969m @ 0.27% CuEq","intercept_hm177":"30m @ 1.10% CuEq","intercept_hm185":"236m @ 0.57% CuEq","ir_retainer_cad":5000}},"quotedText":"These results continue the trend of recent months, with exceptional widths at consistent and regular higher grades above the average MRE grade.","namedEntities":{"people":[{"name":"Heye Daun","role":"President & CEO"},{"name":"Dean Richards","role":"Qualified Person"},{"name":"Aideen McDermott","role":"Head of Investor Relations"}],"products":["Haib Copper Project","Cu concentrate","Mo concentrate"],"companies":[{"name":"Koryx Copper S.A.","ticker":"LI6"},{"name":"ALS Laboratories Ltd.","relationship":"lab"},{"name":"ActLabs","relationship":"lab"},{"name":"TSX Venture Exchange","relationship":"regulator"},{"name":"Falconbridge","relationship":"historical operator"},{"name":"Rio Tinto","relationship":"historical operator"},{"name":"Teck","relationship":"historical operator"},{"name":"Beacon Securities","relationship":"former employer"},{"name":"BMO Capital Markets","relationship":"former employer"}],"dollarAmounts":[{"amount":"CAD$5,000","context":"monthly investor relations retainer"},{"amount":"US$4.54/lb","context":"copper price used in CuEq calculation"},{"amount":"US$22.68/lb","context":"molybdenum price used in CuEq calculation"},{"amount":"US$4,000/oz","context":"gold price used in CuEq calculation"}]},"materialImpact":{"score":3,"reasoning":"Drill results successfully confirmed and expanded mineralization at the Haib project with wide, high-grade intercepts, de-risking the asset and supporting future resource updates. The appointment of a Head of IR is a minor corporate action."},"tickerRelevance":{"others":[{"ticker":"KRY.V","relevance":"other listing"},{"ticker":"KRYXF","relevance":"other listing"}],"primary":"LI6"},"globalImportance":15,"audienceRelevance":20,"eventTypeSecondary":["executive_change"],"importanceComponents":{"tickerTier":"micro-cap","eventGravity":"operational-drill-results","sectorWeight":"mining"}},"event_type":"operations_update","event_type_secondary":["executive_change"],"sentiment":"bullish","material_impact_score":3,"narrative":"Koryx Copper reported assay results from 19 drill holes totaling 8,586 meters at its wholly-owned Haib Copper Project, confirming wide intercepts and consistent high-grade mineralization.\n\nKey intersections included HM167, which returned 969 meters at 0.27% CuEq from surface—the longest intercept to date—along with significant high-grade zones in HM177 and HM185 that exceeded average model grades.\n\nThe company also appointed Aideen McDermott as Head of Investor Relations, subject to TSXV approval, under an agreement paying CAD$5,000 per month.","key_figures":{"customDimensions":{"drill_holes":19,"drill_meters":8586,"intercept_hm167":"969m @ 0.27% CuEq","intercept_hm177":"30m @ 1.10% CuEq","intercept_hm185":"236m @ 0.57% CuEq","ir_retainer_cad":5000}},"named_entities":{"people":[{"name":"Heye Daun","role":"President & CEO"},{"name":"Dean Richards","role":"Qualified Person"},{"name":"Aideen McDermott","role":"Head of Investor Relations"}],"products":["Haib Copper Project","Cu concentrate","Mo concentrate"],"companies":[{"name":"Koryx Copper S.A.","ticker":"LI6"},{"name":"ALS Laboratories Ltd.","relationship":"lab"},{"name":"ActLabs","relationship":"lab"},{"name":"TSX Venture Exchange","relationship":"regulator"},{"name":"Falconbridge","relationship":"historical operator"},{"name":"Rio Tinto","relationship":"historical operator"},{"name":"Teck","relationship":"historical operator"},{"name":"Beacon Securities","relationship":"former employer"},{"name":"BMO Capital Markets","relationship":"former employer"}],"dollarAmounts":[{"amount":"CAD$5,000","context":"monthly investor relations retainer"},{"amount":"US$4.54/lb","context":"copper price used in CuEq calculation"},{"amount":"US$22.68/lb","context":"molybdenum price used in CuEq calculation"},{"amount":"US$4,000/oz","context":"gold price used in CuEq calculation"}]},"model_name":"glm-4.7","prompt_hash":"sha256:727b4b9429a443af","schema_hash":"sha256:05005c02d9cffac9","created_at":"2026-08-26T11:17:37.379Z","global_importance":15,"audience_relevance":20,"importance_components":{"tickerTier":"micro-cap","eventGravity":"operational-drill-results","sectorWeight":"mining"}},"durationMs":163487,"modelName":"glm-4.7"}}