{"success":true,"data":{"pressRelease":{"id":"132547","rtpr_id":"nGNX4VpfBj","ticker":"WNDW","exchange":"OTC","all_tickers":["WNDW"],"title":"SolarWindow Releases Product Specs: ElectroFlex® Bendable Solar","author":"Globe Newswire","published_at":"2026-09-01T12:30:00.513Z","article_body":"SCOTTSDALE, Ariz., Sept. 01, 2026 (GLOBE NEWSWIRE) -- SolarWindow\nTechnologies, Inc. (Symbol: WNDW), today released specifications for the\nCompany’s ElectroFlex(®) product -- ultra-thin, high-power,\n‘peel-and-stick’ flexible solar, commercially launched last week.\n\n\n\nCEO Amit Singh Demonstrates \nElectroFlex(®) Ultra-Thin Flexible Solar\n\nFor OEM manufacturers, ElectroFlex(®) transforms passive surface areas that\nare otherwise dead weight into active sources of onboard power, extending\nrange and reducing generator, shore-power, and grid dependence.\n\nThinner than a dime, ElectroFlex(®) measures 0.85 millimeters, and is\navailable in sheets up to 22 square feet, as large as a standard pool table.\nElectroFlex(®) is up to 40 times thinner and generates up to 7.5 times more\npower than a traditional solar panel (watts per pound). Standard\nElectroFlex(®) sheets weigh as little as 3.2 ounces per square foot.\n\nElectroFlex(®) is built on high-efficiency interdigitated back-contact\nmonocrystalline silicon cells rated at up to 24.4% power conversion\nefficiency. Because the cells carry no front-side busbars, ElectroFlex(®) is\nable to wrap around the contour of a surface without the micro-cracking that\nfractures conventional cell interconnects. ElectroFlex(®) generates\nelectricity on curved and flat surfaces traditional solar could never reach.\n\nElectroFlex(®) is configured to the customer’s exact product\nspecifications, including dimensions, geometry, mounting, power, and color\nrequirements. There are no standard panels sizes or configurations.\n\nSeamless Flush-Mount PV. Built for OEM Integration\n\nElectroFlex(®) offers Tier-1 OEM partners (original equipment manufacturers\nwhich build vehicles, buildings, and devices) a seamless flush-mount solar\nsystem with no racks to engineer, no structures to reinforce, and no\npenetrations to seal.\n\nElectroFlex(®) is ultra-thin, light, and flexible, and bonds directly to the\nproduct on the manufacturer’s own production line in one single step.\nConversely, traditional solar panel mounting requires multiple steps, and\ninefficient, costly, with staggered installation.\n\nUnlike ElectroFlex(®), traditional solar requires aluminum frames, mounting\nracks, roof penetrations, structural reinforcements or supports to carry the\nload, freight shipping for heavy palletized goods, and heavy lifting\nequipment. ElectroFlex(®) eliminates these categories of cost for OEMs and\ntheir customers.\n\nIntegrated Into the Production Line, Not Bolted on Afterward\n\nElectroFlex(®) is applied by the manufacturer on its own production line as\npart of assembly. There is no separate installation event, no crew scheduled\nafter the product is built, and no second handling of a finished unit.\n\nFor qualified OEMs, SolarWindow will engineer, design, and model the energy\nsystem for each product application. SolarWindow supplies all wiring,\nharnessing, electrical systems balancing, and power delivery. SolarWindow then\ndevelops the application process for that specific product, adapts it to the\nmanufacturer’s existing line, and trains the manufacturer’s own personnel\nto apply ElectroFlex(®) in production.\n\nAvailability\n\nElectroFlex(®) is initially available exclusively to America’s Tier-1 OEM\nmanufacturers, expanding to select North American and Asian markets in the\nupcoming quarters. ElectroFlex(® )is targeting transportation, marine,\naerospace, architectural, agricultural, infrastructure and utilities, and\nspecialty vehicle markets.\n\nTier-1 OEM manufacturers evaluating ElectroFlex(®) for their own applications\ncan request specifications, samples, and integration support via the\nCompany’s website at www.solarwindow.com or by calling +1 (800) 213-0689.\n\nA New SolarWindow\n\nAlongside the ElectroFlex(®) launch, SolarWindow unveiled a completely\nredesigned website at www.solarwindow.com. The new site reflects the\nCompany’s evolution from a single-technology developer into an energy\ntechnology platform with a portfolio of products, and gives a clear view of\neach product line, its stage of development, and its market applications.\n\nInterested parties are encouraged to visit www.solarwindow.com to explore\nElectroFlex(®) and the SolarWindow product portfolio.\n\nElectroFlex(®) Product Specifications\n\nElectrical\n\n Cell technology Interdigitated back-contact (IBC) monocrystalline silicon \n Cell architecture No front-side busbars. All contacts on the rear of the cell \n Cell power conversion efficiency Up to 24.4% \n Nominal power density Approximately 200 to 220 watts per square meter (approximately 18.5 to 20.5 watts per square foot) at standard test conditions \n Electrical balance of system Wiring, harnessing, electrical systems balancing, and power delivery engineered and supplied by SolarWindow \n\nPhysical\n\n Total stack thickness 0.4mm – 1.2mm \n Layer construction Composite laminate embedding the photovoltaic cell matrix \n Weight 0.2 – 0.4 lbs. per square foot \n Sheet format Configured to the customer’s exact dimensions, geometry, mounting, and power requirements. No standard panel sizes \n Front surface No glass. No aluminum frame \n\nInstallation and Integration\n\n Mounting method Bonds directly to the surface: factory-applied adhesive with protective liner, pressure-sensitive adhesive tape, one-component structural silicone, two-component polyurethane adhesive, others \n Installed profile Lies virtually flush to the surface \n Mounting hardware None. No racks, rails, frames, ballast, or roof penetrations \n Structural requirement No structural reinforcement or engineering load assessment \n Surface compatibility Flat, curved, contoured, and irregular surfaces. \n Application method Applied by the manufacturer on its own production line as part of assembly. No separate installation event \n System engineering Each application engineered, designed, and modeled by SolarWindow \n Process integration Application process developed by SolarWindow and adapted to the manufacturer’s existing production line \n Training and qualification SolarWindow trains manufacturer personnel and qualifies the application process on the customer’s line \n\nEnvironmental\n\n Operating temperature range -40°C to +85°C \n Outdoor exposure Engineered for sustained outdoor exposure including rain, hail, snow, humidity, UV light, and salt spray \n\nElectroFlex(®) Compared to Conventional Rigid Solar\n\n ElectroFlex (®) Conventional rigid silicon panel \n Thickness 0.85 mm Approximately 40 mm including frame \n Weight 0.2 – 0.4 lbs per square foot 2.4 to 2.7 lb per square foot \n Construction Flexible adhesive-backed sheet Rigid glass module in an aluminum frame \n Mounting Bonds directly to the surface Racks, rails, ballast, or roof penetrations \n Structural work None Load assessment and reinforcement commonly required \n Surfaces served Flat, curved, contoured, irregular Planar only \n Cell efficiency Up to 24.4% Comparable range \n\nThickness and weight comparisons are stated against a conventional 40 mm\nframed solar panel\n\nSolarWindow Technologies, Inc.\n\nSolarWindow Technologies, Inc. (Symbol: WNDW; www.solarwindow.com) is an\nenergy technology company developing and commercializing solar products\ndesigned to generate electricity on the surfaces of everyday products and\nbuildings, including surfaces that conventional solar panels cannot serve.\n\nThe Company's portfolio currently spans two product lines:\n\nElectroFlex(®) is an ultra-thin, ultra-lightweight, flexible solar product\navailable today for manufacturers, bonding directly to flat and curved\nsurfaces without racks, frames, or mounting hardware, across transportation,\nmarine, aerospace, agricultural, infrastructure, and specialty vehicle\napplications.\n\nLiquidElectricity(®) is a proprietary transparent coating that generates\nelectricity when applied to glass and plastics, producing power under natural,\nartificial, low, shaded, and reflected light conditions.\n\nThe SolarWindow Promise: Engineer, design, and ultimately manufacture and\ndeliver products which reward customers with affordable clean energy for a\nhealthier, safer, and more sustainable planet. SolarWindow is\nClearlyElectric(®).\n\nSolarWindow Contacts\n\nFor additional information on SolarWindow, please call Amit Singh at 1 (800)\n213-0689, or visit www.solarwindow.com, follow us on X @solartechwindow or on\nFacebook.\n\nTo receive future press releases via email, please visit:\nhttps://solarwindow.com/news/.\n\nTo view the full HTML text of this release, please visit:\nhttps://www.solarwindow.com/2026/09/solarwindow_releases_product_specs_electroflex_bendable_solar/.\n\nSocial Media Disclaimer\n\nSolarWindow stockholders, investors and others should note that we announce\nmaterial information to the public about the Company through a variety of\nmeans, including our website (https://www.solarwindow.com/investors), through\npress releases, SEC filings, public conference calls, via our corporate X\naccount (@solartechwindow), Facebook page\n(https://www.facebook.com/SolarWindowTechnologies) and LinkedIn page\n(https://www.linkedin.com/company/solar-window-technology/) in order to\nachieve broad, non-exclusionary distribution of information to the public and\nto comply with our disclosure obligations under Regulation FD. We encourage\nour investors and others to monitor and review the information we make public\nin these locations as such information could be deemed to be material\ninformation. Please note that this list may be updated from time to time.\n\nForward Looking Statements\n\nThis press release contains information about SolarWindow that may constitute\n“forward-looking statements” as that term is defined under the Private\nSecurities Litigation Reform Act of 1995 and other securities laws. These\nforward-looking statements are based upon current expectations or beliefs, as\nwell as a number of assumptions about future events. We intend the\nforward-looking statements to be covered by the safe harbor provisions for\nforward-looking statements in those laws as applicable. Although SolarWindow\nbelieves that the expectations reflected in such forward-looking statements\nand the assumptions upon which they are based are reasonable as at the time\nmade, no assurance can be given that such expectations and assumptions will\nprove to have been correct.\n\nGenerally, we have identified such forward-looking statements by using such\nwords as “aim,” “anticipate,” “believe,” “could,”\n“estimate,” “expect,” “forecast,” “future,” “goal,”\n“intend,” “may,” “plan,” “project,” “should,”\n“target,” “will,” and similar expressions or by using future dates in\nconnection with any discussion of, among other things, statements expressing\ngeneral views about the future development, manufacture, production,\nmarketing, or sale of SolarWindow products, or the execution of manufacturing,\nlicensing, or partnership agreements, that we expect or anticipate will occur\nin the future, as well as anticipated cost savings, potential capital and\noperational improvements, and changes in the global economic environment.\nHowever, the absence of these words or similar expressions does not mean that\na statement is not forward-looking. Forward-looking statements include all\nstatements that are not historical facts, but instead represent only our\nbeliefs regarding future goals, plans and expectations about our prospects for\nthe future and other events, many of which, by their nature, are inherently\nuncertain and outside of our control. It is possible that actual results may\ndiffer, possibly materially, from the anticipated results indicated in these\nforward-looking statements.\n\nCaution should be taken not to place undue reliance on any such\nforward-looking statements because such statements speak only as of the date\nwhen made and are subject to numerous factors and uncertainties, including but\nnot limited to adverse economic conditions, intense competition, lack of\nmeaningful research results, entry of new competitors and products, adverse\nfederal, state and local government regulation, inadequate capital, unexpected\ncosts and operating deficits, increases in general and administrative costs,\ntermination of contracts or agreements, technological obsolescence, technical\nproblems relating to manufacturing methodologies, price increases for supplies\nand components, litigation and other proceedings, adverse publicity and news\ncoverage, inability to carry out research, development and commercialization\nplans, loss or retirement of key executives and research scientists, failure\nto obtain required regulatory approvals, inflationary factors, and other\nrisks. All information in this press release is as of the date set forth\nabove. SolarWindow does not undertake any duty to update any forward-looking\nstatement to conform the statement to actual results or changes in its\nexpectations, whether because of new information, future events or otherwise,\nexcept as required by law. No statement herein should be considered an offer\nor a solicitation of an offer for the purchase or sale of any securities.\n\nA photo accompanying this announcement is available at\nhttps://www.globenewswire.com/NewsRoom/AttachmentNg/cf79b471-f42e-4938-8c28-422b20e6f0de\n\n(https://www.globenewswire.com/NewsRoom/AttachmentNg/8d47873a-2eae-4d35-b0a7-ea791c79b0b6)\nFlexible Solar You Can Hold in One Hand \n(https://www.globenewswire.com/NewsRoom/AttachmentNg/cf79b471-f42e-4938-8c28-422b20e6f0de/en)\nCEO Amit Singh Demonstrates ElectroFlex® Ultra-Thin Flexible Solar\n\n\nGlobeNewswire, Inc. 2026","article_body_html":"","raw_payload":{"data":{"id":"nGNX4VpfBj","title":"SolarWindow Releases Product Specs: ElectroFlex® Bendable Solar","author":"Globe Newswire","ticker":"WNDW","created":"2026-09-01T12:30:00.513Z","tickers":["WNDW"],"exchange":"OTC","article_body":"SCOTTSDALE, Ariz., Sept. 01, 2026 (GLOBE NEWSWIRE) -- SolarWindow\nTechnologies, Inc. (Symbol: WNDW), today released specifications for the\nCompany’s ElectroFlex(®) product -- ultra-thin, high-power,\n‘peel-and-stick’ flexible solar, commercially launched last week.\n\n\n\nCEO Amit Singh Demonstrates \nElectroFlex(®) Ultra-Thin Flexible Solar\n\nFor OEM manufacturers, ElectroFlex(®) transforms passive surface areas that\nare otherwise dead weight into active sources of onboard power, extending\nrange and reducing generator, shore-power, and grid dependence.\n\nThinner than a dime, ElectroFlex(®) measures 0.85 millimeters, and is\navailable in sheets up to 22 square feet, as large as a standard pool table.\nElectroFlex(®) is up to 40 times thinner and generates up to 7.5 times more\npower than a traditional solar panel (watts per pound). Standard\nElectroFlex(®) sheets weigh as little as 3.2 ounces per square foot.\n\nElectroFlex(®) is built on high-efficiency interdigitated back-contact\nmonocrystalline silicon cells rated at up to 24.4% power conversion\nefficiency. Because the cells carry no front-side busbars, ElectroFlex(®) is\nable to wrap around the contour of a surface without the micro-cracking that\nfractures conventional cell interconnects. ElectroFlex(®) generates\nelectricity on curved and flat surfaces traditional solar could never reach.\n\nElectroFlex(®) is configured to the customer’s exact product\nspecifications, including dimensions, geometry, mounting, power, and color\nrequirements. There are no standard panels sizes or configurations.\n\nSeamless Flush-Mount PV. Built for OEM Integration\n\nElectroFlex(®) offers Tier-1 OEM partners (original equipment manufacturers\nwhich build vehicles, buildings, and devices) a seamless flush-mount solar\nsystem with no racks to engineer, no structures to reinforce, and no\npenetrations to seal.\n\nElectroFlex(®) is ultra-thin, light, and flexible, and bonds directly to the\nproduct on the manufacturer’s own production line in one single step.\nConversely, traditional solar panel mounting requires multiple steps, and\ninefficient, costly, with staggered installation.\n\nUnlike ElectroFlex(®), traditional solar requires aluminum frames, mounting\nracks, roof penetrations, structural reinforcements or supports to carry the\nload, freight shipping for heavy palletized goods, and heavy lifting\nequipment. ElectroFlex(®) eliminates these categories of cost for OEMs and\ntheir customers.\n\nIntegrated Into the Production Line, Not Bolted on Afterward\n\nElectroFlex(®) is applied by the manufacturer on its own production line as\npart of assembly. There is no separate installation event, no crew scheduled\nafter the product is built, and no second handling of a finished unit.\n\nFor qualified OEMs, SolarWindow will engineer, design, and model the energy\nsystem for each product application. SolarWindow supplies all wiring,\nharnessing, electrical systems balancing, and power delivery. SolarWindow then\ndevelops the application process for that specific product, adapts it to the\nmanufacturer’s existing line, and trains the manufacturer’s own personnel\nto apply ElectroFlex(®) in production.\n\nAvailability\n\nElectroFlex(®) is initially available exclusively to America’s Tier-1 OEM\nmanufacturers, expanding to select North American and Asian markets in the\nupcoming quarters. ElectroFlex(® )is targeting transportation, marine,\naerospace, architectural, agricultural, infrastructure and utilities, and\nspecialty vehicle markets.\n\nTier-1 OEM manufacturers evaluating ElectroFlex(®) for their own applications\ncan request specifications, samples, and integration support via the\nCompany’s website at www.solarwindow.com or by calling +1 (800) 213-0689.\n\nA New SolarWindow\n\nAlongside the ElectroFlex(®) launch, SolarWindow unveiled a completely\nredesigned website at www.solarwindow.com. The new site reflects the\nCompany’s evolution from a single-technology developer into an energy\ntechnology platform with a portfolio of products, and gives a clear view of\neach product line, its stage of development, and its market applications.\n\nInterested parties are encouraged to visit www.solarwindow.com to explore\nElectroFlex(®) and the SolarWindow product portfolio.\n\nElectroFlex(®) Product Specifications\n\nElectrical\n\n Cell technology Interdigitated back-contact (IBC) monocrystalline silicon \n Cell architecture No front-side busbars. All contacts on the rear of the cell \n Cell power conversion efficiency Up to 24.4% \n Nominal power density Approximately 200 to 220 watts per square meter (approximately 18.5 to 20.5 watts per square foot) at standard test conditions \n Electrical balance of system Wiring, harnessing, electrical systems balancing, and power delivery engineered and supplied by SolarWindow \n\nPhysical\n\n Total stack thickness 0.4mm – 1.2mm \n Layer construction Composite laminate embedding the photovoltaic cell matrix \n Weight 0.2 – 0.4 lbs. per square foot \n Sheet format Configured to the customer’s exact dimensions, geometry, mounting, and power requirements. No standard panel sizes \n Front surface No glass. No aluminum frame \n\nInstallation and Integration\n\n Mounting method Bonds directly to the surface: factory-applied adhesive with protective liner, pressure-sensitive adhesive tape, one-component structural silicone, two-component polyurethane adhesive, others \n Installed profile Lies virtually flush to the surface \n Mounting hardware None. No racks, rails, frames, ballast, or roof penetrations \n Structural requirement No structural reinforcement or engineering load assessment \n Surface compatibility Flat, curved, contoured, and irregular surfaces. \n Application method Applied by the manufacturer on its own production line as part of assembly. No separate installation event \n System engineering Each application engineered, designed, and modeled by SolarWindow \n Process integration Application process developed by SolarWindow and adapted to the manufacturer’s existing production line \n Training and qualification SolarWindow trains manufacturer personnel and qualifies the application process on the customer’s line \n\nEnvironmental\n\n Operating temperature range -40°C to +85°C \n Outdoor exposure Engineered for sustained outdoor exposure including rain, hail, snow, humidity, UV light, and salt spray \n\nElectroFlex(®) Compared to Conventional Rigid Solar\n\n ElectroFlex (®) Conventional rigid silicon panel \n Thickness 0.85 mm Approximately 40 mm including frame \n Weight 0.2 – 0.4 lbs per square foot 2.4 to 2.7 lb per square foot \n Construction Flexible adhesive-backed sheet Rigid glass module in an aluminum frame \n Mounting Bonds directly to the surface Racks, rails, ballast, or roof penetrations \n Structural work None Load assessment and reinforcement commonly required \n Surfaces served Flat, curved, contoured, irregular Planar only \n Cell efficiency Up to 24.4% Comparable range \n\nThickness and weight comparisons are stated against a conventional 40 mm\nframed solar panel\n\nSolarWindow Technologies, Inc.\n\nSolarWindow Technologies, Inc. (Symbol: WNDW; www.solarwindow.com) is an\nenergy technology company developing and commercializing solar products\ndesigned to generate electricity on the surfaces of everyday products and\nbuildings, including surfaces that conventional solar panels cannot serve.\n\nThe Company's portfolio currently spans two product lines:\n\nElectroFlex(®) is an ultra-thin, ultra-lightweight, flexible solar product\navailable today for manufacturers, bonding directly to flat and curved\nsurfaces without racks, frames, or mounting hardware, across transportation,\nmarine, aerospace, agricultural, infrastructure, and specialty vehicle\napplications.\n\nLiquidElectricity(®) is a proprietary transparent coating that generates\nelectricity when applied to glass and plastics, producing power under natural,\nartificial, low, shaded, and reflected light conditions.\n\nThe SolarWindow Promise: Engineer, design, and ultimately manufacture and\ndeliver products which reward customers with affordable clean energy for a\nhealthier, safer, and more sustainable planet. SolarWindow is\nClearlyElectric(®).\n\nSolarWindow Contacts\n\nFor additional information on SolarWindow, please call Amit Singh at 1 (800)\n213-0689, or visit www.solarwindow.com, follow us on X @solartechwindow or on\nFacebook.\n\nTo receive future press releases via email, please visit:\nhttps://solarwindow.com/news/.\n\nTo view the full HTML text of this release, please visit:\nhttps://www.solarwindow.com/2026/09/solarwindow_releases_product_specs_electroflex_bendable_solar/.\n\nSocial Media Disclaimer\n\nSolarWindow stockholders, investors and others should note that we announce\nmaterial information to the public about the Company through a variety of\nmeans, including our website (https://www.solarwindow.com/investors), through\npress releases, SEC filings, public conference calls, via our corporate X\naccount (@solartechwindow), Facebook page\n(https://www.facebook.com/SolarWindowTechnologies) and LinkedIn page\n(https://www.linkedin.com/company/solar-window-technology/) in order to\nachieve broad, non-exclusionary distribution of information to the public and\nto comply with our disclosure obligations under Regulation FD. We encourage\nour investors and others to monitor and review the information we make public\nin these locations as such information could be deemed to be material\ninformation. Please note that this list may be updated from time to time.\n\nForward Looking Statements\n\nThis press release contains information about SolarWindow that may constitute\n“forward-looking statements” as that term is defined under the Private\nSecurities Litigation Reform Act of 1995 and other securities laws. These\nforward-looking statements are based upon current expectations or beliefs, as\nwell as a number of assumptions about future events. We intend the\nforward-looking statements to be covered by the safe harbor provisions for\nforward-looking statements in those laws as applicable. Although SolarWindow\nbelieves that the expectations reflected in such forward-looking statements\nand the assumptions upon which they are based are reasonable as at the time\nmade, no assurance can be given that such expectations and assumptions will\nprove to have been correct.\n\nGenerally, we have identified such forward-looking statements by using such\nwords as “aim,” “anticipate,” “believe,” “could,”\n“estimate,” “expect,” “forecast,” “future,” “goal,”\n“intend,” “may,” “plan,” “project,” “should,”\n“target,” “will,” and similar expressions or by using future dates in\nconnection with any discussion of, among other things, statements expressing\ngeneral views about the future development, manufacture, production,\nmarketing, or sale of SolarWindow products, or the execution of manufacturing,\nlicensing, or partnership agreements, that we expect or anticipate will occur\nin the future, as well as anticipated cost savings, potential capital and\noperational improvements, and changes in the global economic environment.\nHowever, the absence of these words or similar expressions does not mean that\na statement is not forward-looking. Forward-looking statements include all\nstatements that are not historical facts, but instead represent only our\nbeliefs regarding future goals, plans and expectations about our prospects for\nthe future and other events, many of which, by their nature, are inherently\nuncertain and outside of our control. It is possible that actual results may\ndiffer, possibly materially, from the anticipated results indicated in these\nforward-looking statements.\n\nCaution should be taken not to place undue reliance on any such\nforward-looking statements because such statements speak only as of the date\nwhen made and are subject to numerous factors and uncertainties, including but\nnot limited to adverse economic conditions, intense competition, lack of\nmeaningful research results, entry of new competitors and products, adverse\nfederal, state and local government regulation, inadequate capital, unexpected\ncosts and operating deficits, increases in general and administrative costs,\ntermination of contracts or agreements, technological obsolescence, technical\nproblems relating to manufacturing methodologies, price increases for supplies\nand components, litigation and other proceedings, adverse publicity and news\ncoverage, inability to carry out research, development and commercialization\nplans, loss or retirement of key executives and research scientists, failure\nto obtain required regulatory approvals, inflationary factors, and other\nrisks. All information in this press release is as of the date set forth\nabove. SolarWindow does not undertake any duty to update any forward-looking\nstatement to conform the statement to actual results or changes in its\nexpectations, whether because of new information, future events or otherwise,\nexcept as required by law. No statement herein should be considered an offer\nor a solicitation of an offer for the purchase or sale of any securities.\n\nA photo accompanying this announcement is available at\nhttps://www.globenewswire.com/NewsRoom/AttachmentNg/cf79b471-f42e-4938-8c28-422b20e6f0de\n\n(https://www.globenewswire.com/NewsRoom/AttachmentNg/8d47873a-2eae-4d35-b0a7-ea791c79b0b6)\nFlexible Solar You Can Hold in One Hand \n(https://www.globenewswire.com/NewsRoom/AttachmentNg/cf79b471-f42e-4938-8c28-422b20e6f0de/en)\nCEO Amit Singh Demonstrates ElectroFlex® Ultra-Thin Flexible Solar\n\n\nGlobeNewswire, Inc. 2026"},"type":"article","timestamp":"2026-09-01T12:30:00.573843268Z","server_sent_at_ms":1788265800573},"received_at":"2026-09-01T12:30:00.660Z","source_url":"https://www.globenewswire.com/news-release/2026/09/01/3354148/0/en/solarwindow-releases-product-specs-electroflex-bendable-solar.html"},"analysis":{"id":"121446","press_release_id":"132547","analysis_json":{"industry":{"label":"Renewable Energy Equipment & Services","sector":"Energy"},"redFlags":[],"eventType":"product_launch","narrative":"SolarWindow released detailed specifications for its ElectroFlex flexible solar product, highlighting a thickness of just 0.85 millimeters and power conversion efficiency of up to 24.4%.\n\nThe ultra-lightweight sheets weigh roughly 3.2 ounces per square foot and are designed to integrate directly into the production lines of OEMs in transportation and aerospace markets.\n\nCommercially available to Tier-1 manufacturers, ElectroFlex targets curved and flat surfaces without requiring additional mounting hardware, with expansion planned for North American and Asian markets.","sentiment":"bullish","agentHooks":{"shouldPost":false,"suggestedAngle":"Specs release highlights efficiency and form factor potential for OEMs, but revenue impact remains unproven."},"keyFigures":{"customDimensions":{"thickness_mm":0.85,"sheet_size_sqft":"up to 22","operating_temp_c":"-40 to +85","efficiency_percent":24.4,"thickness_range_mm":"0.4 - 1.2","weight_oz_per_sqft":3.2,"power_density_watts_per_sqm":"200-220"}},"quotedText":"For OEM manufacturers, ElectroFlex(®) transforms passive surface areas that are otherwise dead weight into active sources of onboard power","namedEntities":{"people":[{"name":"Amit Singh","role":"CEO"}],"products":["ElectroFlex®","LiquidElectricity®"],"companies":[{"name":"SolarWindow Technologies, Inc.","ticker":"WNDW"}],"dollarAmounts":[]},"materialImpact":{"score":2,"reasoning":"Release of technical specifications for a recently launched product; lacks financial metrics or customer contracts to signal immediate material revenue impact."},"tickerRelevance":{"others":[],"primary":"WNDW"},"globalImportance":10,"audienceRelevance":10,"eventTypeSecondary":[],"importanceComponents":{"tickerTier":"micro-cap","eventGravity":"product_specs","sectorWeight":"renewables"}},"event_type":"product_launch","event_type_secondary":null,"sentiment":"bullish","material_impact_score":2,"narrative":"SolarWindow released detailed specifications for its ElectroFlex flexible solar product, highlighting a thickness of just 0.85 millimeters and power conversion efficiency of up to 24.4%.\n\nThe ultra-lightweight sheets weigh roughly 3.2 ounces per square foot and are designed to integrate directly into the production lines of OEMs in transportation and aerospace markets.\n\nCommercially available to Tier-1 manufacturers, ElectroFlex targets curved and flat surfaces without requiring additional mounting hardware, with expansion planned for North American and Asian markets.","key_figures":{"customDimensions":{"thickness_mm":0.85,"sheet_size_sqft":"up to 22","operating_temp_c":"-40 to +85","efficiency_percent":24.4,"thickness_range_mm":"0.4 - 1.2","weight_oz_per_sqft":3.2,"power_density_watts_per_sqm":"200-220"}},"named_entities":{"people":[{"name":"Amit Singh","role":"CEO"}],"products":["ElectroFlex®","LiquidElectricity®"],"companies":[{"name":"SolarWindow Technologies, Inc.","ticker":"WNDW"}],"dollarAmounts":[]},"model_name":"glm-4.7","prompt_hash":"sha256:727b4b9429a443af","schema_hash":"sha256:05005c02d9cffac9","created_at":"2026-09-01T14:13:14.884Z","global_importance":10,"audience_relevance":10,"importance_components":{"tickerTier":"micro-cap","eventGravity":"product_specs","sectorWeight":"renewables"}},"durationMs":207895,"modelName":"glm-4.7"}}