{"success":true,"data":{"pressRelease":{"id":"168984","rtpr_id":"nNFC2c2nWL-20261014","ticker":"DBG","exchange":"","all_tickers":["DBG"],"title":"Doubleview Reports First 2026 Drill Assays from Hat Project; H109 Returns 541.2 Metres of 0.27% CuEq and H113-H114 Add South-West Extension Data","author":"Newsfile Corp","published_at":"2026-10-14T12:54:41.143Z","article_body":"Vancouver, British Columbia--(Newsfile Corp. - October 14, 2026) - Doubleview\nGold Corp. (TSXV: DBG) (OTCQX: DBLVF) (FSE: 1D4) (\"Doubleview\" or the\n\"Company\") is pleased to announce assay results for drill holes H109, H110,\nH113 and H114, the first reported assay results from the Company's 2026\ndrilling campaign at its 100%-owned Hat Polymetallic Deposit in northwestern\nBritish Columbia.\n\nThe Company has completed approximately 7,400 metres of drilling at the Hat\nProject during 2026 to date, and drilling is ongoing. Drill holes H109 and\nH110 were drilled from the Hat East area, while drill holes H113 and H114 were\ndrilled from the South-West Extension area. The holes were designed to provide\nadditional geological and assay information in areas where the Company's\ncurrent block model and mineralization model indicated a need for additional\ndefinition.\n\nThe results reported in this release add data from two separate locations on\nthe Hat Deposit: the east side of the deposit and the south-west extension\narea. Additional assay results from both areas remain pending and will be\nannounced following receipt, validation and review by the Company's Qualified\nPerson. The Company's geological interpretation remains subject to change as\nadditional drilling and assay data are received and integrated.\n\nDrill holes H109, H110, H113 and H114 were not included in the Mineral\nResource Estimate with an effective date of February 4, 2026, or in the\nPreliminary Economic Assessment disclosed by the Company in March 2026. These\nresults will be considered for future geological modelling, resource\nestimation and engineering studies. No updated mineral resource estimate, pit\ndesign, economic analysis or resource classification change has been completed\nusing the results reported in this news release.\n\nHighlights\n* First 2026 assay release: H109, H110, H113 and H114 are the first drill\nholes from the 2026 Hat drilling campaign to be reported by assay.\n* Two target areas reported: H109 and H110 provide additional data from Hat\nEast, while H113 and H114 add data from the South-West Extension area.\n* H109 returned 541.2 metres grading 0.27% CuEq from 60.0 metres, including\n128.0 metres grading 0.48% CuEq, 19.0 metres grading 1.36% CuEq and 13.0\nmetres grading 1.80% CuEq.\n* H110 returned 408.4 metres grading 0.20% CuEq from 38.7 metres, including\n111.7 metres grading 0.30% CuEq, 30.0 metres grading 0.78% CuEq, 19.0 metres\ngrading 1.01% CuEq and 6.0 metres grading 1.89% CuEq.\n* H113 returned 417.6 metres grading 0.23% CuEq from 24.8 metres, including\n174.4 metres grading 0.31% CuEq, 82.4 metres grading 0.37% CuEq and 7.4 metres\ngrading 1.37% CuEq.\n* H114 returned 567.7 metres grading 0.16% CuEq from 36.3 metres, including\n89.3 metres grading 0.41% CuEq and 55.0 metres grading 0.49% CuEq.\n* The holes were designed to fill important data gaps and provide additional\ndrill density for future modelling. No change to current resource categories\nis implied until an updated MRE is completed and approved by a Qualified\nPerson.\n* Copper equivalent values in this release exclude scandium oxide (Sc2O3),\nwhich is reported separately in the assay table.\nSelected Assay Results\n\nHat East - H109 and H110: H109 returned 541.2 metres grading 0.27% CuEq from\n60.0 metres, including 432.0 metres grading 0.30% CuEq, 217.2 metres grading\n0.37% CuEq, 128.0 metres grading 0.48% CuEq, 19.0 metres grading 1.36% CuEq\nand 13.0 metres grading 1.80% CuEq. H110 returned 408.4 metres grading 0.20%\nCuEq from 38.7 metres, including 111.7 metres grading 0.30% CuEq, 30.0 metres\ngrading 0.78% CuEq, 19.0 metres grading 1.01% CuEq and 6.0 metres grading\n1.89% CuEq.\n\nAll reported intervals are drill core lengths. True widths have not been\ndetermined. Complete assay intervals are presented in Table 1.\n\nCurrent MRE and PEA Context\n\nReferences in this news release to the 2026 PEA pit shell or proposed pit\noutline are provided only for geological context. They do not imply that the\nnew drill holes are included in a mine plan, that mineral reserves have been\nestimated, or that an updated economic analysis has been completed. Mineral\nresources are not mineral reserves and do not have demonstrated economic\nviability. The PEA is preliminary in nature and includes inferred mineral\nresources that are considered too speculative geologically to have the\neconomic considerations applied to them that would enable them to be\ncategorized as mineral reserves.\n\nCEO Comment\n\nFarshad Shirvani, President and CEO of Doubleview Gold Corp., commented:\n\"These first 2026 assays are important because they add disciplined follow-up\ndata from two separate parts of the Hat Deposit. H109 and H110 provide\nadditional close-spaced information from Hat East, including a strong interval\nin H109 beneath the 2026 PEA pit shell, while H113 and H114 add meaningful\ndata from the South-West Extension area. These holes were drilled with a clear\npurpose: to fill gaps, test continuity and improve the data available for\nfuture modelling. While these results do not change the current MRE or PEA on\ntheir own, they are important building blocks for future updates. We look\nforward to reporting additional assays from both areas after they are\nreceived, validated and reviewed.\"\n\nTable 1: Summary of H109, H110, H113 and H114 Drill Core Assay Intercepts\n\n DDH Note From (m) To (m) Length (m) CuEq (%) excl. Sc2O3 Au (g/t) Cu (%) Ag (g/t) Co (g/t) Sc2O3 (g/t) \n H109 60.0 601.2 541.2 0.27 0.14 0.13 0.25 62 25.6 \n Incl. 153.0 585.0 432.0 0.30 0.15 0.14 0.22 66 26.1 \n Incl. 153.0 187.9 34.9 0.80 0.77 0.11 0.29 43 24.1 \n Incl. 384.0 601.2 217.2 0.37 0.13 0.23 0.31 65 27.1 \n Incl. 413.0 587.0 174.0 0.41 0.15 0.25 0.35 67 25.6 \n Incl. 459.0 587.0 128.0 0.48 0.17 0.30 0.43 65 24.1 \n Incl. 467.0 585.0 118.0 0.50 0.18 0.31 0.45 65 22.9 \n Incl. 467.0 486.0 19.0 1.36 0.46 0.90 1.07 136 20.0 \n Incl. 470.0 483.0 13.0 1.80 0.62 1.20 1.38 159 20.7 \n Incl. 560.0 585.0 25.0 0.58 0.25 0.34 0.60 62 25.4 \n H110 38.7 447.0 408.4 0.20 0.10 0.09 0.12 56 26.9 \n Incl. 38.7 60.0 21.4 0.48 0.33 0.15 0.63 115 15.6 \n Incl. 335.4 447.0 111.7 0.30 0.11 0.19 0.17 52 28.8 \n Incl. 417.0 447.0 30.0 0.78 0.30 0.49 0.40 61 30.2 \n Incl. 428.0 447.0 19.0 1.01 0.39 0.64 0.53 66 25.7 \n Incl. 428.0 434.0 6.0 1.89 0.75 1.20 0.97 100 25.6 \n H113 24.8 442.4 417.6 0.23 0.11 0.12 0.25 60 36.1 \n Incl. 24.8 133.0 108.2 0.22 0.16 0.06 0.15 56 38.1 \n Incl. 268.0 442.4 174.4 0.31 0.10 0.20 0.41 66 31.5 \n Incl. 360.0 442.4 82.4 0.37 0.14 0.22 0.41 63 28.5 \n Incl. 435.0 442.4 7.4 1.37 0.49 0.90 2.37 100 21.4 \n H114 36.3 604.0 567.7 0.16 0.06 0.08 0.16 57 26.3 \n Incl. 514.8 604.0 89.3 0.41 0.14 0.26 0.40 73 22.8 \n Incl. 549.0 604.0 55.0 0.49 0.16 0.32 0.47 58 22.3 \n\n \n\nNotes to Table 1\n\n1. Copper Equivalent (CuEq) values exclude scandium oxide (Sc2O3).\n2. Reported intervals are drill core lengths. True widths have not been\ndetermined.\n3. CuEq values are provided for comparative presentation of drill intercepts\nand do not imply economic viability. Grades for each metal used in the CuEq\ncalculation are shown separately in Table 1.\n4. Parameters used to calculate CuEq: gold price US$2,365.09/oz, silver price\nUS$27.43/oz, copper price US$4.17/lb and cobalt price US$14.76/lb. Recoveries\nused: gold 89.0%, silver 68.0%, copper 84.0% and cobalt 78.0%.\n5. CuEq (%) = ([Ag grade in ppm] x 27.43 x 0.68 / 31.1035 + [Au grade in ppm]\nx 2365.09 x 0.89 / 31.1035 + 0.0001 x [Co grade in ppm] x 14.76 x 0.78 x\n22.0462 + 0.0001 x [Cu grade in ppm] x 4.17 x 0.84 x 22.0462) / (4.17 x\n22.0462 x 0.84).\n6. Reported Sc2O3 grades are shown for information only and no value for\nscandium oxide is included in CuEq values reported in this release.\n\n(https://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_001full.jpg)\n\nFigure 1: Plan view showing drill holes H109, H110, H113 and H114 relative to\nthe 2026 proposed pit outline and two reported 2026 assay areas: Hat East and\nthe South-West Extension.\n\nTo view an enhanced version of this graphic, please visit:\nhttps://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_001full.jpg\n\n(https://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_002full.jpg)\n\nFigure 2: North-south section view showing drill holes H109 and H110, nearby\nclose drill holes, and mineralized intervals relative to the 2026 PEA pit\nshell.\n\nTo view an enhanced version of this graphic, please visit:\nhttps://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_002full.jpg\n\n(https://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_003full.jpg)\n\nFigure 3: East-west section view showing drill holes H109 and H110 and\nmineralized intervals relative to the 2026 PEA pit shell.\n\nTo view an enhanced version of this graphic, please visit:\nhttps://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_003full.jpg\n\n(https://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_004full.jpg)\n\nFigure 4: South-west section view showing drill holes H113 and H114 and\nmineralized intervals in the South-West Extension area of the Hat Deposit.\n\nTo view an enhanced version of this graphic, please visit:\nhttps://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_004full.jpg\n\nGeological Interpretation\n\nHat East - H109 and H110\n\nH109 and H110 were drilled from the same Hat East platform and were planned to\ntest close-spaced mineralization on the east side of the Hat Deposit. The\ndrill holes provide additional assay and geological information in an area\nwhere the Company is seeking to improve the continuity, geometry and grade\ndistribution inputs for future block model work.\n\nH109 intersected a broad mineralized interval beginning at 60.0 metres and\ncontinuing for 541.2 metres. Within this interval, stronger mineralization\noccurs between 467.0 and 486.0 metres, including 13.0 metres grading 1.80%\nCuEq. The Company interprets this as further support for mineralization below\nthe 2026 PEA pit shell in the Hat East area.\n\nH110 also returned broad mineralization, including 408.4 metres grading 0.20%\nCuEq from 38.7 metres and higher-grade intervals near the lower portion of the\nreported intercept, including 19.0 metres grading 1.01% CuEq and 6.0 metres\ngrading 1.89% CuEq. Together, H109 and H110 achieved their intended purpose by\nadding close-spaced assay information to an important eastern part of the\nmineralized system.\n\nSouth-West Extension - H113 and H114\n\nH113 and H114 were drilled from the South-West Extension area to add assay\ninformation in a part of the Hat Deposit where additional drilling is required\nto better define mineralization continuity and geometry. The Company\ninterprets these holes as adding mineralization confirmation to the south-west\narea, while also providing data that may assist future modelling of the\noverall mineralization envelope.\n\nH113 returned 417.6 metres grading 0.23% CuEq from 24.8 metres, including\n174.4 metres grading 0.31% CuEq, 82.4 metres grading 0.37% CuEq and 7.4 metres\ngrading 1.37% CuEq. H114 returned 567.7 metres grading 0.16% CuEq from 36.3\nmetres, including 89.3 metres grading 0.41% CuEq and 55.0 metres grading 0.49%\nCuEq. These intervals are interpreted by the Company to further support\nmineralization in the south-west part of the Hat system; however, the final\ninterpretation is subject to change as additional drill holes from this and\nother locations are received, validated and modelled.\n\nThe results reported in this release are expected to be incorporated into\nfuture geological modelling after completion of standard QA/QC review and\nQualified Person verification. Until an updated mineral resource estimate is\ncompleted, these results should not be interpreted as changing current mineral\nresource quantities, mineral resource classifications, pit geometry or project\neconomics.\n\nTable 2: Drill Hole Locations and Orientations\n\n DDH ID UTM-East (m) UTM-North (m) Elevation (m) Dip (deg) Azimuth (deg) Max Depth (m) \n H109 348418 6453987 982 -69.6 227 687 \n H110 348418 6453987 982 -69.21 273 576 \n H113 347337 6453725 950 -67.02 30 502 \n H114 347337 6453725 650 -87.91 0 605.7 \n\n \n\nCoordinates are reported in NAD83 / UTM Zone 9N.\n\nQuality Assurance and Quality Control\n\nHat Project drill cores are processed at Doubleview's field camp where they\nare photographed, measured and logged by technical staff and then divided\nusing a diamond-bladed saw. One half is placed in a secure sample bag and\nforwarded to the independent analytical laboratory. The remaining half core is\nstored on site where it is available for further examination and sampling.\nSamples are subject to a chain-of-custody routine as they are shipped from\ncamp to a bonded carrier for delivery to the laboratory.\n\nAll core samples are prepared and analyzed at AGAT Laboratories in Calgary, an\nindependent ISO 17025 and ISO 9001 certified facility. Samples are dried,\ncrushed to 70% passing 2 mm, split to obtain a 250 g representative portion,\nand pulverized to 85% passing 75 micrometres. Gold, platinum and palladium are\nassayed by 30-50 g fire assay with ICP-OES finish. Multi-element analyses are\nperformed by four-acid digestion with ICP-OES/MS, with ore-grade assays\napplied where required. Selected samples are further analyzed for whole-rock\noxides using lithium borate fusion with ICP-OES, and loss on ignition is\ndetermined separately. Routine quality assurance protocols include insertion\nof blanks, duplicates and certified reference materials.\n\nQualified Person\n\nErik Ostensoe, P.Geo., a consulting geologist and Doubleview's Qualified\nPerson with respect to the Hat Project as defined by National Instrument\n43-101 Standards of Disclosure for Mineral Projects, has reviewed and approved\nthe technical contents of this news release. Mr. Ostensoe is not independent\nof Doubleview as he is a shareholder of the Company.\n\nAbout Doubleview Gold Corp.\n\nDoubleview Gold Corp. is a mineral resource exploration and development\ncompany headquartered in Vancouver, British Columbia, Canada. It is publicly\ntraded on the TSX Venture Exchange (TSXV: DBG), OTCQX (DBLVF) and Frankfurt\nStock Exchange (FSE: 1D4). Doubleview focuses on identifying, acquiring and\nadvancing precious and base metal exploration projects, with a strong emphasis\non British Columbia and on critical minerals including copper, cobalt and\nscandium.\n\nAbout the Hat Polymetallic Deposit\n\nThe Hat Deposit, located in northwestern British Columbia, is a polymetallic\nporphyry project with copper, gold, cobalt, silver and scandium\nmineralization. The Company continues to advance the Hat Project through\nexploration drilling, metallurgical studies, environmental and engineering\nwork, and technical studies required for responsible project advancement.\n\nOn behalf of the Board of Directors,\n\nFarshad Shirvani\nPresident & Chief Executive Officer\n\nFor further information, please contact:\nDoubleview Gold Corp.\nVancouver, BC\nFarshad Shirvani, President & CEO\nT: 604.678.9587\nE: corporate@doubleview.ca\n\nCautionary Note Regarding Forward-Looking Information\n\nCertain statements in this news release constitute forward-looking information\nwithin the meaning of applicable Canadian securities laws. Forward-looking\ninformation includes, but is not limited to, statements regarding future\ndrilling, future assay results, geological modelling, potential future mineral\nresource estimate updates, future engineering studies, potential changes to\nresource confidence, and the potential significance of the drill results\nreported in this release. Forward-looking information is based on the\nCompany's current expectations, estimates, forecasts and assumptions, which\nare subject to risks and uncertainties that may cause actual results or events\nto differ materially from those expressed or implied by such forward-looking\ninformation. These risks include exploration risks, assay and interpretation\nrisks, geological modelling uncertainty, permitting and environmental risks,\noperational risks, market conditions, commodity prices, financing\navailability, and other risks associated with mineral exploration and\ndevelopment. Readers are cautioned not to place undue reliance on\nforward-looking information. Except as required by applicable securities laws,\nthe Company undertakes no obligation to update or revise forward-looking\ninformation.\n\nNEITHER TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT\nTERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS\nRESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.\n\n\nTo view the source version of this press release, please visit\nhttps://www.newsfilecorp.com/release/318915","article_body_html":"","raw_payload":{"data":{"id":"nNFC2c2nWL-20261014","title":"Doubleview Reports First 2026 Drill Assays from Hat Project; H109 Returns 541.2 Metres of 0.27% CuEq and H113-H114 Add South-West Extension Data","author":"Newsfile Corp","ticker":"DBG","created":"2026-10-14T12:54:41.143Z","tickers":["DBG"],"exchange":"","article_body":"Vancouver, British Columbia--(Newsfile Corp. - October 14, 2026) - Doubleview\nGold Corp. (TSXV: DBG) (OTCQX: DBLVF) (FSE: 1D4) (\"Doubleview\" or the\n\"Company\") is pleased to announce assay results for drill holes H109, H110,\nH113 and H114, the first reported assay results from the Company's 2026\ndrilling campaign at its 100%-owned Hat Polymetallic Deposit in northwestern\nBritish Columbia.\n\nThe Company has completed approximately 7,400 metres of drilling at the Hat\nProject during 2026 to date, and drilling is ongoing. Drill holes H109 and\nH110 were drilled from the Hat East area, while drill holes H113 and H114 were\ndrilled from the South-West Extension area. The holes were designed to provide\nadditional geological and assay information in areas where the Company's\ncurrent block model and mineralization model indicated a need for additional\ndefinition.\n\nThe results reported in this release add data from two separate locations on\nthe Hat Deposit: the east side of the deposit and the south-west extension\narea. Additional assay results from both areas remain pending and will be\nannounced following receipt, validation and review by the Company's Qualified\nPerson. The Company's geological interpretation remains subject to change as\nadditional drilling and assay data are received and integrated.\n\nDrill holes H109, H110, H113 and H114 were not included in the Mineral\nResource Estimate with an effective date of February 4, 2026, or in the\nPreliminary Economic Assessment disclosed by the Company in March 2026. These\nresults will be considered for future geological modelling, resource\nestimation and engineering studies. No updated mineral resource estimate, pit\ndesign, economic analysis or resource classification change has been completed\nusing the results reported in this news release.\n\nHighlights\n* First 2026 assay release: H109, H110, H113 and H114 are the first drill\nholes from the 2026 Hat drilling campaign to be reported by assay.\n* Two target areas reported: H109 and H110 provide additional data from Hat\nEast, while H113 and H114 add data from the South-West Extension area.\n* H109 returned 541.2 metres grading 0.27% CuEq from 60.0 metres, including\n128.0 metres grading 0.48% CuEq, 19.0 metres grading 1.36% CuEq and 13.0\nmetres grading 1.80% CuEq.\n* H110 returned 408.4 metres grading 0.20% CuEq from 38.7 metres, including\n111.7 metres grading 0.30% CuEq, 30.0 metres grading 0.78% CuEq, 19.0 metres\ngrading 1.01% CuEq and 6.0 metres grading 1.89% CuEq.\n* H113 returned 417.6 metres grading 0.23% CuEq from 24.8 metres, including\n174.4 metres grading 0.31% CuEq, 82.4 metres grading 0.37% CuEq and 7.4 metres\ngrading 1.37% CuEq.\n* H114 returned 567.7 metres grading 0.16% CuEq from 36.3 metres, including\n89.3 metres grading 0.41% CuEq and 55.0 metres grading 0.49% CuEq.\n* The holes were designed to fill important data gaps and provide additional\ndrill density for future modelling. No change to current resource categories\nis implied until an updated MRE is completed and approved by a Qualified\nPerson.\n* Copper equivalent values in this release exclude scandium oxide (Sc2O3),\nwhich is reported separately in the assay table.\nSelected Assay Results\n\nHat East - H109 and H110: H109 returned 541.2 metres grading 0.27% CuEq from\n60.0 metres, including 432.0 metres grading 0.30% CuEq, 217.2 metres grading\n0.37% CuEq, 128.0 metres grading 0.48% CuEq, 19.0 metres grading 1.36% CuEq\nand 13.0 metres grading 1.80% CuEq. H110 returned 408.4 metres grading 0.20%\nCuEq from 38.7 metres, including 111.7 metres grading 0.30% CuEq, 30.0 metres\ngrading 0.78% CuEq, 19.0 metres grading 1.01% CuEq and 6.0 metres grading\n1.89% CuEq.\n\nAll reported intervals are drill core lengths. True widths have not been\ndetermined. Complete assay intervals are presented in Table 1.\n\nCurrent MRE and PEA Context\n\nReferences in this news release to the 2026 PEA pit shell or proposed pit\noutline are provided only for geological context. They do not imply that the\nnew drill holes are included in a mine plan, that mineral reserves have been\nestimated, or that an updated economic analysis has been completed. Mineral\nresources are not mineral reserves and do not have demonstrated economic\nviability. The PEA is preliminary in nature and includes inferred mineral\nresources that are considered too speculative geologically to have the\neconomic considerations applied to them that would enable them to be\ncategorized as mineral reserves.\n\nCEO Comment\n\nFarshad Shirvani, President and CEO of Doubleview Gold Corp., commented:\n\"These first 2026 assays are important because they add disciplined follow-up\ndata from two separate parts of the Hat Deposit. H109 and H110 provide\nadditional close-spaced information from Hat East, including a strong interval\nin H109 beneath the 2026 PEA pit shell, while H113 and H114 add meaningful\ndata from the South-West Extension area. These holes were drilled with a clear\npurpose: to fill gaps, test continuity and improve the data available for\nfuture modelling. While these results do not change the current MRE or PEA on\ntheir own, they are important building blocks for future updates. We look\nforward to reporting additional assays from both areas after they are\nreceived, validated and reviewed.\"\n\nTable 1: Summary of H109, H110, H113 and H114 Drill Core Assay Intercepts\n\n DDH Note From (m) To (m) Length (m) CuEq (%) excl. Sc2O3 Au (g/t) Cu (%) Ag (g/t) Co (g/t) Sc2O3 (g/t) \n H109 60.0 601.2 541.2 0.27 0.14 0.13 0.25 62 25.6 \n Incl. 153.0 585.0 432.0 0.30 0.15 0.14 0.22 66 26.1 \n Incl. 153.0 187.9 34.9 0.80 0.77 0.11 0.29 43 24.1 \n Incl. 384.0 601.2 217.2 0.37 0.13 0.23 0.31 65 27.1 \n Incl. 413.0 587.0 174.0 0.41 0.15 0.25 0.35 67 25.6 \n Incl. 459.0 587.0 128.0 0.48 0.17 0.30 0.43 65 24.1 \n Incl. 467.0 585.0 118.0 0.50 0.18 0.31 0.45 65 22.9 \n Incl. 467.0 486.0 19.0 1.36 0.46 0.90 1.07 136 20.0 \n Incl. 470.0 483.0 13.0 1.80 0.62 1.20 1.38 159 20.7 \n Incl. 560.0 585.0 25.0 0.58 0.25 0.34 0.60 62 25.4 \n H110 38.7 447.0 408.4 0.20 0.10 0.09 0.12 56 26.9 \n Incl. 38.7 60.0 21.4 0.48 0.33 0.15 0.63 115 15.6 \n Incl. 335.4 447.0 111.7 0.30 0.11 0.19 0.17 52 28.8 \n Incl. 417.0 447.0 30.0 0.78 0.30 0.49 0.40 61 30.2 \n Incl. 428.0 447.0 19.0 1.01 0.39 0.64 0.53 66 25.7 \n Incl. 428.0 434.0 6.0 1.89 0.75 1.20 0.97 100 25.6 \n H113 24.8 442.4 417.6 0.23 0.11 0.12 0.25 60 36.1 \n Incl. 24.8 133.0 108.2 0.22 0.16 0.06 0.15 56 38.1 \n Incl. 268.0 442.4 174.4 0.31 0.10 0.20 0.41 66 31.5 \n Incl. 360.0 442.4 82.4 0.37 0.14 0.22 0.41 63 28.5 \n Incl. 435.0 442.4 7.4 1.37 0.49 0.90 2.37 100 21.4 \n H114 36.3 604.0 567.7 0.16 0.06 0.08 0.16 57 26.3 \n Incl. 514.8 604.0 89.3 0.41 0.14 0.26 0.40 73 22.8 \n Incl. 549.0 604.0 55.0 0.49 0.16 0.32 0.47 58 22.3 \n\n \n\nNotes to Table 1\n\n1. Copper Equivalent (CuEq) values exclude scandium oxide (Sc2O3).\n2. Reported intervals are drill core lengths. True widths have not been\ndetermined.\n3. CuEq values are provided for comparative presentation of drill intercepts\nand do not imply economic viability. Grades for each metal used in the CuEq\ncalculation are shown separately in Table 1.\n4. Parameters used to calculate CuEq: gold price US$2,365.09/oz, silver price\nUS$27.43/oz, copper price US$4.17/lb and cobalt price US$14.76/lb. Recoveries\nused: gold 89.0%, silver 68.0%, copper 84.0% and cobalt 78.0%.\n5. CuEq (%) = ([Ag grade in ppm] x 27.43 x 0.68 / 31.1035 + [Au grade in ppm]\nx 2365.09 x 0.89 / 31.1035 + 0.0001 x [Co grade in ppm] x 14.76 x 0.78 x\n22.0462 + 0.0001 x [Cu grade in ppm] x 4.17 x 0.84 x 22.0462) / (4.17 x\n22.0462 x 0.84).\n6. Reported Sc2O3 grades are shown for information only and no value for\nscandium oxide is included in CuEq values reported in this release.\n\n(https://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_001full.jpg)\n\nFigure 1: Plan view showing drill holes H109, H110, H113 and H114 relative to\nthe 2026 proposed pit outline and two reported 2026 assay areas: Hat East and\nthe South-West Extension.\n\nTo view an enhanced version of this graphic, please visit:\nhttps://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_001full.jpg\n\n(https://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_002full.jpg)\n\nFigure 2: North-south section view showing drill holes H109 and H110, nearby\nclose drill holes, and mineralized intervals relative to the 2026 PEA pit\nshell.\n\nTo view an enhanced version of this graphic, please visit:\nhttps://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_002full.jpg\n\n(https://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_003full.jpg)\n\nFigure 3: East-west section view showing drill holes H109 and H110 and\nmineralized intervals relative to the 2026 PEA pit shell.\n\nTo view an enhanced version of this graphic, please visit:\nhttps://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_003full.jpg\n\n(https://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_004full.jpg)\n\nFigure 4: South-west section view showing drill holes H113 and H114 and\nmineralized intervals in the South-West Extension area of the Hat Deposit.\n\nTo view an enhanced version of this graphic, please visit:\nhttps://images.newsfilecorp.com/files/8003/318915_1ca93714f4667a49_004full.jpg\n\nGeological Interpretation\n\nHat East - H109 and H110\n\nH109 and H110 were drilled from the same Hat East platform and were planned to\ntest close-spaced mineralization on the east side of the Hat Deposit. The\ndrill holes provide additional assay and geological information in an area\nwhere the Company is seeking to improve the continuity, geometry and grade\ndistribution inputs for future block model work.\n\nH109 intersected a broad mineralized interval beginning at 60.0 metres and\ncontinuing for 541.2 metres. Within this interval, stronger mineralization\noccurs between 467.0 and 486.0 metres, including 13.0 metres grading 1.80%\nCuEq. The Company interprets this as further support for mineralization below\nthe 2026 PEA pit shell in the Hat East area.\n\nH110 also returned broad mineralization, including 408.4 metres grading 0.20%\nCuEq from 38.7 metres and higher-grade intervals near the lower portion of the\nreported intercept, including 19.0 metres grading 1.01% CuEq and 6.0 metres\ngrading 1.89% CuEq. Together, H109 and H110 achieved their intended purpose by\nadding close-spaced assay information to an important eastern part of the\nmineralized system.\n\nSouth-West Extension - H113 and H114\n\nH113 and H114 were drilled from the South-West Extension area to add assay\ninformation in a part of the Hat Deposit where additional drilling is required\nto better define mineralization continuity and geometry. The Company\ninterprets these holes as adding mineralization confirmation to the south-west\narea, while also providing data that may assist future modelling of the\noverall mineralization envelope.\n\nH113 returned 417.6 metres grading 0.23% CuEq from 24.8 metres, including\n174.4 metres grading 0.31% CuEq, 82.4 metres grading 0.37% CuEq and 7.4 metres\ngrading 1.37% CuEq. H114 returned 567.7 metres grading 0.16% CuEq from 36.3\nmetres, including 89.3 metres grading 0.41% CuEq and 55.0 metres grading 0.49%\nCuEq. These intervals are interpreted by the Company to further support\nmineralization in the south-west part of the Hat system; however, the final\ninterpretation is subject to change as additional drill holes from this and\nother locations are received, validated and modelled.\n\nThe results reported in this release are expected to be incorporated into\nfuture geological modelling after completion of standard QA/QC review and\nQualified Person verification. Until an updated mineral resource estimate is\ncompleted, these results should not be interpreted as changing current mineral\nresource quantities, mineral resource classifications, pit geometry or project\neconomics.\n\nTable 2: Drill Hole Locations and Orientations\n\n DDH ID UTM-East (m) UTM-North (m) Elevation (m) Dip (deg) Azimuth (deg) Max Depth (m) \n H109 348418 6453987 982 -69.6 227 687 \n H110 348418 6453987 982 -69.21 273 576 \n H113 347337 6453725 950 -67.02 30 502 \n H114 347337 6453725 650 -87.91 0 605.7 \n\n \n\nCoordinates are reported in NAD83 / UTM Zone 9N.\n\nQuality Assurance and Quality Control\n\nHat Project drill cores are processed at Doubleview's field camp where they\nare photographed, measured and logged by technical staff and then divided\nusing a diamond-bladed saw. One half is placed in a secure sample bag and\nforwarded to the independent analytical laboratory. The remaining half core is\nstored on site where it is available for further examination and sampling.\nSamples are subject to a chain-of-custody routine as they are shipped from\ncamp to a bonded carrier for delivery to the laboratory.\n\nAll core samples are prepared and analyzed at AGAT Laboratories in Calgary, an\nindependent ISO 17025 and ISO 9001 certified facility. Samples are dried,\ncrushed to 70% passing 2 mm, split to obtain a 250 g representative portion,\nand pulverized to 85% passing 75 micrometres. Gold, platinum and palladium are\nassayed by 30-50 g fire assay with ICP-OES finish. Multi-element analyses are\nperformed by four-acid digestion with ICP-OES/MS, with ore-grade assays\napplied where required. Selected samples are further analyzed for whole-rock\noxides using lithium borate fusion with ICP-OES, and loss on ignition is\ndetermined separately. Routine quality assurance protocols include insertion\nof blanks, duplicates and certified reference materials.\n\nQualified Person\n\nErik Ostensoe, P.Geo., a consulting geologist and Doubleview's Qualified\nPerson with respect to the Hat Project as defined by National Instrument\n43-101 Standards of Disclosure for Mineral Projects, has reviewed and approved\nthe technical contents of this news release. Mr. Ostensoe is not independent\nof Doubleview as he is a shareholder of the Company.\n\nAbout Doubleview Gold Corp.\n\nDoubleview Gold Corp. is a mineral resource exploration and development\ncompany headquartered in Vancouver, British Columbia, Canada. It is publicly\ntraded on the TSX Venture Exchange (TSXV: DBG), OTCQX (DBLVF) and Frankfurt\nStock Exchange (FSE: 1D4). Doubleview focuses on identifying, acquiring and\nadvancing precious and base metal exploration projects, with a strong emphasis\non British Columbia and on critical minerals including copper, cobalt and\nscandium.\n\nAbout the Hat Polymetallic Deposit\n\nThe Hat Deposit, located in northwestern British Columbia, is a polymetallic\nporphyry project with copper, gold, cobalt, silver and scandium\nmineralization. The Company continues to advance the Hat Project through\nexploration drilling, metallurgical studies, environmental and engineering\nwork, and technical studies required for responsible project advancement.\n\nOn behalf of the Board of Directors,\n\nFarshad Shirvani\nPresident & Chief Executive Officer\n\nFor further information, please contact:\nDoubleview Gold Corp.\nVancouver, BC\nFarshad Shirvani, President & CEO\nT: 604.678.9587\nE: corporate@doubleview.ca\n\nCautionary Note Regarding Forward-Looking Information\n\nCertain statements in this news release constitute forward-looking information\nwithin the meaning of applicable Canadian securities laws. Forward-looking\ninformation includes, but is not limited to, statements regarding future\ndrilling, future assay results, geological modelling, potential future mineral\nresource estimate updates, future engineering studies, potential changes to\nresource confidence, and the potential significance of the drill results\nreported in this release. Forward-looking information is based on the\nCompany's current expectations, estimates, forecasts and assumptions, which\nare subject to risks and uncertainties that may cause actual results or events\nto differ materially from those expressed or implied by such forward-looking\ninformation. These risks include exploration risks, assay and interpretation\nrisks, geological modelling uncertainty, permitting and environmental risks,\noperational risks, market conditions, commodity prices, financing\navailability, and other risks associated with mineral exploration and\ndevelopment. Readers are cautioned not to place undue reliance on\nforward-looking information. Except as required by applicable securities laws,\nthe Company undertakes no obligation to update or revise forward-looking\ninformation.\n\nNEITHER TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT\nTERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS\nRESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.\n\n\nTo view the source version of this press release, please visit\nhttps://www.newsfilecorp.com/release/318915"},"type":"article","timestamp":"2026-10-14T12:54:41.183311205Z","server_sent_at_ms":1791982481183},"received_at":"2026-10-14T12:54:41.338Z","source_url":"https://www.newsfilecorp.com/release/318915"},"analysis":{"id":"157232","press_release_id":"168984","analysis_json":{"industry":{"label":"Metals & Mining","sector":"Materials"},"redFlags":["results do not change the current MRE, PEA or resource classifications","true widths not determined; intervals are drill core lengths","Qualified Person is a company shareholder, not independent"],"eventType":"operations_update","narrative":"Doubleview Gold reported the first 2026 drill assays from its 100%-owned Hat Polymetallic Deposit, with holes H109, H110, H113 and H114.\n\nH109 returned 541.2 metres grading 0.27% CuEq from 60.0 metres, including 13.0 metres at 1.80% CuEq, with the company interpreting the interval as supporting mineralization below the 2026 PEA pit shell at Hat East.\n\nH113 and H114 added first data from the South-West Extension area, where H113 cut 417.6 metres at 0.23% CuEq. Approximately 7,400 metres have been drilled in 2026 and drilling continues, with additional assays pending.\n\nThe holes were not included in the February 2026 mineral resource estimate or the March 2026 PEA, and no change to resources or economics is implied until an updated MRE is completed.","sentiment":"bullish","agentHooks":{"shouldPost":true,"suggestedAngle":"Broad low-grade porphyry intercepts at Hat extend mineralization below the PEA pit shell — watch for updated MRE as more 2026 assays land."},"keyFigures":{"customDimensions":{"H109_intercept":"541.2m @ 0.27% CuEq from 60.0m, incl. 13.0m @ 1.80% CuEq","H110_intercept":"408.4m @ 0.20% CuEq from 38.7m, incl. 6.0m @ 1.89% CuEq","H113_intercept":"417.6m @ 0.23% CuEq from 24.8m, incl. 7.4m @ 1.37% CuEq","H114_intercept":"567.7m @ 0.16% CuEq from 36.3m, incl. 55.0m @ 0.49% CuEq","metres_drilled_2026":7400}},"quotedText":"These holes were drilled with a clear purpose: to fill gaps, test continuity and improve the data available for future modelling.","namedEntities":{"people":[{"name":"Farshad Shirvani","role":"President & CEO"},{"name":"Erik Ostensoe, P.Geo.","role":"Qualified Person / consulting geologist"}],"products":["Hat Polymetallic Deposit"],"companies":[{"name":"Doubleview Gold Corp.","ticker":"DBG","relationship":"filer"},{"name":"AGAT Laboratories","relationship":"assay laboratory"}],"dollarAmounts":[{"amount":"US$2,365.09/oz","context":"gold price used in CuEq calculation"},{"amount":"US$4.17/lb","context":"copper price used in CuEq calculation"}]},"materialImpact":{"score":2,"reasoning":"Positive first 2026 drill assays at the 100%-owned Hat Project, including 541.2m of 0.27% CuEq in H109, but results do not change the MRE or PEA and are infill/extension data — incremental exploration news, not a market-moving event."},"tickerRelevance":{"others":[{"ticker":"DBLVF","relevance":"US OTCQX listing of same issuer"},{"ticker":"1D4","relevance":"Frankfurt listing of same issuer"}],"primary":"DBG"},"globalImportance":18,"audienceRelevance":12,"eventTypeSecondary":[],"importanceComponents":{"tickerTier":"micro-cap TSXV junior","eventGravity":"exploration drill results, no resource change","sectorWeight":"moderate for copper/gold juniors","issuerAuthored":true}},"event_type":"operations_update","event_type_secondary":null,"sentiment":"bullish","material_impact_score":2,"narrative":"Doubleview Gold reported the first 2026 drill assays from its 100%-owned Hat Polymetallic Deposit, with holes H109, H110, H113 and H114.\n\nH109 returned 541.2 metres grading 0.27% CuEq from 60.0 metres, including 13.0 metres at 1.80% CuEq, with the company interpreting the interval as supporting mineralization below the 2026 PEA pit shell at Hat East.\n\nH113 and H114 added first data from the South-West Extension area, where H113 cut 417.6 metres at 0.23% CuEq. Approximately 7,400 metres have been drilled in 2026 and drilling continues, with additional assays pending.\n\nThe holes were not included in the February 2026 mineral resource estimate or the March 2026 PEA, and no change to resources or economics is implied until an updated MRE is completed.","key_figures":{"customDimensions":{"H109_intercept":"541.2m @ 0.27% CuEq from 60.0m, incl. 13.0m @ 1.80% CuEq","H110_intercept":"408.4m @ 0.20% CuEq from 38.7m, incl. 6.0m @ 1.89% CuEq","H113_intercept":"417.6m @ 0.23% CuEq from 24.8m, incl. 7.4m @ 1.37% CuEq","H114_intercept":"567.7m @ 0.16% CuEq from 36.3m, incl. 55.0m @ 0.49% CuEq","metres_drilled_2026":7400}},"named_entities":{"people":[{"name":"Farshad Shirvani","role":"President & CEO"},{"name":"Erik Ostensoe, P.Geo.","role":"Qualified Person / consulting geologist"}],"products":["Hat Polymetallic Deposit"],"companies":[{"name":"Doubleview Gold Corp.","ticker":"DBG","relationship":"filer"},{"name":"AGAT Laboratories","relationship":"assay laboratory"}],"dollarAmounts":[{"amount":"US$2,365.09/oz","context":"gold price used in CuEq calculation"},{"amount":"US$4.17/lb","context":"copper price used in CuEq calculation"}]},"model_name":"glm-5.3-flashx","prompt_hash":"sha256:5c812bd9e28b810d","schema_hash":"sha256:05005c02d9cffac9","created_at":"2026-10-14T12:54:47.845Z","global_importance":18,"audience_relevance":12,"importance_components":{"tickerTier":"micro-cap TSXV junior","eventGravity":"exploration drill results, no resource change","sectorWeight":"moderate for copper/gold juniors","issuerAuthored":true}},"durationMs":6493,"modelName":"glm-5.3-flashx"}}