{"success":true,"data":{"pressRelease":{"id":"180649","rtpr_id":"nACSPJ4NWa-20261027","ticker":"HTRC","exchange":"","all_tickers":["HTRC"],"title":"High Tide Resources Reports 99.8 Metres of 31.7% Fe from Labrador West Iron Project","author":"ACCESSWIRE","published_at":"2026-10-27T10:00:00.679Z","article_body":"TORONTO, ON / ACCESS Newswire (https://www.accessnewswire.com/) / October 27,\n2026 / High Tide Resources Corp. (\"High Tide\" or the \"Company\") (CSE:HTRC) is\npleased to provide its third set of assay results (Table 1) from its flagship\nLabrador West Iron Project (the \"Project\" or \"Property\"). The Project is\nlocated 20 km northeast and adjacent to the Iron Ore Company of Canada's\n(\"IOC\", majority-owned by Rio Tinto) Carol Lake Mine complex in Labrador City,\nNL (Figure 7).\n\nTable 1: Significant Iron Intercepts of Oxide-Facies Iron Formation\n\n Drill Hole ID  Easting *  Northing *  From (m)  To (m)  Length (m)  Fe %  \n 26LB0078       650874     5897279     38.5      88.2    49.7        24.5  \n                                       140.0     149.0   9.0         32.9  \n 26LB0079       651550     5895915     8.0       77.0    69.0        28.6  \n                                       111       123.9   12.9        27.0  \n                                       150.7     161.6   10.8        28.7  \n                                       190.0     202.9   12.9        25.2  \n                                       221.6     255.0   33.4        26.7  \n 26LB0080       652044     5896805     4.6       20.0    15.4        28.8  \n 26LB0082       651386     5895482     19.2      119.0   99.8        31.7  \n                                       170.0     209.0   39.0        23.3  \n 26LB0084       651875     5897243     41.0      132.1   91.1        27.7  \n\nThe above, together with the previously reported assay results, comprise the\ncomplete results from the drill holes received to date. True Widths are\nestimated to be 80 to 90% of drill core length\n*Significant Fe T (%) values are weighted length averages of continuous total\niron greater than 18% and allowing for intervals up to 9 metres in width below\nthis grade.\n**All holes were drilled vertical (-90 degrees) & UTM coordinates are NAD83\nZone 19N\n*** Drill hole 26LB0080 was terminated 20 m downhole due to technical reasons\n\nSteve Roebuck, President & CEO of High Tide, commented: \"One particularly\nnoteworthy aspect of these results is the scale they may indicate. Hole\n26LB0082 intersected a thick interval of higher-grade iron mineralization\nbeginning almost at surface along the eastern edge of the current deposit\nlimits, while hole 26LB0084 returned strong grade and thickness well beyond\nthe current northern limit. What makes this especially significant is that\nthese holes are located more than 1,800 metres apart, north to south.\nTogether, they underscore the potential scale of the mineralized system, which\nremains open in all directions.\n\nOver the course of the summer drill campaign the Company completed 27 drill\nholes for a total of 6335 metres of HQ & NQ core drilled. The Company\npublished two press releases on 31 August and 16 September disclosing assays\nfrom its drilling. Additional results will be disclosed when received.\n\nDrill collar locations and section lines are shown on Figure 1, with vertical\nlong section views (looking toward the northwest) shown on Figures 2, 3, 4, 5\n& 6.\n(https://app.accessnewswire.com/imagelibrary/9b134638-0608-4603-8163-4c1f2de57962/1242307/picture9.png)\nFigure 1. Labrador West Project - Plan map showing current mineral resource\noutline boundary, surface trace of vertical sections and location of drill\nholes.\n(https://app.accessnewswire.com/imagelibrary/f45a81e7-d083-4518-98f9-59ea743e7c95/1242307/figure-2-labrador-west-project.png)\nFigure 2. Labrador West Project - Long section A - A' - assays in red font are\nreported here and assays in black font have been previously reported.\n(https://app.accessnewswire.com/imagelibrary/ca99aab6-a3cb-48f8-be9c-a5b96973b164/1242307/three.png)\nFigure 3. Labrador West Project - Long section B - B' - assays in red font are\nreported here and assays in black font have been previously reported.\n(https://app.accessnewswire.com/imagelibrary/a77d3869-0cd3-4728-83f4-e574b950162d/1242307/labradorfour.png)\nFigure 4. Labrador West Project - Long section C - C' assays in red font are\nreported here and assays in black font have been previously reported.\n(https://app.accessnewswire.com/imagelibrary/c1557dbf-20a8-4e95-9c37-f22ca7a342f9/1242307/long-section-d--d.png)\nFigure 5. Labrador West Project - Long section D - D' assays in red font are\nreported here and assays in black font have been previously reported.\n(https://app.accessnewswire.com/imagelibrary/50bbf979-6f41-40a4-93b6-282ac6819823/1242307/eesix.png)\nFigure 6. Labrador West Project - Long section E - E' - assays in red font are\nreported here and assays in black font have been previously reported.\n\nAssays were completed at Activation Laboratories (\"ActLabs\") in Ancaster\nOntario, which is independent of High Tide. At ActLabs, analysis followed a\nspecific sample preparation protocol and analysis regime. In addition, sample\nstandards were submitted every 20(th) sample to ensure quality control and\nquality assurance consistent with CIM best practice methods.\n\nHydroelectric Power, Iron and the Western Labrador Trough Infrastructure\nAdvantage\n\nOn July 21, 2026, the governments of Newfoundland and Labrador, Quebec and\nCanada jointly announced a new power generation and transmission agreement,\nunder which the federal government committed over $1 billion to the\nconstruction of a Labrador West transmission line necessary to open new mining\nand other industrial projects in the Labrador Trough.\n\nThe Labrador Trough of western Labrador and adjoining Quebec constitutes\nCanada's primary iron producing district and is host to world-class deposits\nthat have been mined for more than half a century. These have produced over 2\nbillion tonnes of iron ore to date and are considered to have very significant\ngrowth potential. The high quality of the deposits in the region allows for a\nwide range in product diversity, which includes premium concentrate and\npellets, both blast furnace and direct reduction grades.\n\nThe Labrador West Iron Project is strategically located near the mining\ncommunities of Wabush and Labrador City in the province of Newfoundland &\nLabrador and Fermont, Quebec. The area is home to Champion Iron's shovel-ready\nKami Deposit and Bloom Lake Mine, ArcelorMittal's Mont-Wright Mine, Tacora\nResources' Scully Mine and Rio Tinto IOC's Carol Lake Mine.\n\nThe Wabush and Labrador City region is very well served with skilled labour\nand a highway as well as access to abundant low-cost hydroelectricity and a\ncommon carrier railway. The railway has 80 million tonnes per year of capacity\nfor transport of iron products to the deep-water port of Sept-Îles, Quebec,\nwhich provides year-round access to global markets.\n\nAbout High Tide\n\nHigh Tide is focused on and committed to the development of mineral projects\ncritical to infrastructure development using industry best practices combined\nwith a strong social licence from local communities. High Tide owns a 100%\ninterest in the Labrador West Iron Project which hosts a NI 43-101 Inferred\nmineral resource of 655 Mt at 28.84% Fe, as set out in the Company's technical\nreport dated April 6, 2023 and is located adjacent to IOC's Carol Lake Mine in\nLabrador City, NL. This resource is exposed at surface and was pit constrained\nfor an open-pit mining scenario. The Technical Report was filed on SEDAR on\nApril 6, 2023, and was authored by Ryan Kressall, M.Sc., P.Geo., Matthew\nHerrington, M.Sc., P.Geo., Catherine Pelletier, P.Eng., and Jeffrey Cassoff,\nP.Eng.\n\nThe Company also owns a 100% interest in the Lac Pegma copper-nickel-cobalt\ndeposit located 50 kilometres southeast of Fermont, Quebec.\n\nFurther details on the Company, including the NI 43-101 technical report on\nthe Labrador West Iron property can be found on the Company's website at\nwww.hightideresources.com.\n\nQualified Person\n\nThe technical information contained in this news release has been approved by\nSteve Roebuck,\n\nP.Geo., Director, President and CEO of High Tide, who is a Qualified Person as\ndefined in \"National Instrument 43-101, Standards of Disclosure for Mineral\nProjects.\"\n\nSampling Protocol, Analytical Procedures, and QAQC\n\nMercator Geological Services supervised the 2026 diamond drilling program.\nThis included designing and implementing a comprehensive QAQC program\nconsistent with CIM best practice methods. Core was delivered to a secured\nlocation for geological and geotechnical logging, and sampling. After core\nlogging, core was marked for sampling and splitting. QAQC certified reference\nmaterials were used for blanks and standards and inserted at a rate of every\nalternating 20th sample. All split samples were stored in a secure location in\nsealed shipping bags prior to shipment to the laboratory for assay testing.\n\nSample shipments were securely delivered via courier to ActLabs in Ancaster,\nOntario for sample preparation and analytical testing. Sample preparation was\nthrough the laboratory's standard rock preparation protocol that begins with\njaw crushing followed by pulverization of a sample split (250g) to generate a\npulp having 95% passing 0.105 mm grain size. Iron (Fe) content was measured\nusing the Lithium Metaborate fusion technique. Prior to fusion, the loss on\nignition (LOI), which includes H(2)O+, CO(2), S and other volatiles, is\ndetermined from the weight loss after roasting the sample. The fusion disk is\nmade by mixing the roasted sample with a combination of lithium metaborate and\nlithium tetraborate. Samples are fused in Pt crucibles using an automated\ncrucible fluxer and automatically poured into Pt molds for casting. Samples\nare then analyzed on a Panalytical Axios Advanced wavelength dispersive XRF.\nActlabs is an accredited commercially-operated laboratory analytical services\nfirm that is ISO 17025 registered. Actlabs is independent of High Tide\nResources, and Mercator.\n\nFor further information, please contact:\n\nSteve Roebuck, P.Geo.\nDirector, CEO & Shareholder\nEmail : sroebuck@hightideresources.com\n\nJean-Francois Meilleur\nChairman & Shareholder\nEmail: jfm@hightideresources.com\n\nNeither the Canadian Securities Exchange nor its regulation services provider\naccepts responsibility for the adequacy or accuracy of this news release.\n\nForward looking information\n\nThis news release includes statements (\"forward-looking statements\")\ncontaining \"forward-looking information\" which is not comprised of historical\nfacts. Forward-looking statements include estimates and statements that\ndescribe the Company's future plans, objectives or goals, including words to\nthe effect that the Company or management expects a stated condition or result\nto occur. Forward-looking statements may be identified by such terms as\n\"believes\", \"anticipates\", \"expects\", \"estimates\", \"may\", \"could\", \"would\",\n\"will\", or \"plan\". Since forward-looking statements are based on assumptions\nand address future events and conditions, by their very nature they involve\ninherent risks and uncertainties. Although these statements are based on\ninformation currently available to the Company, the Company provides no\nassurance that actual results will meet management's expectations. Risks,\nuncertainties and other factors involved with forward-looking information\ncould cause actual events, results, performance, prospects and opportunities\nto differ materially from those expressed or implied by such forward-looking\ninformation. Forward looking statements in this news release include, but are\nnot limited to, those concerning: developing the Labrador West Iron Project\ninto the next stage of development, any expectation of growth of the Company's\nmineral resource or its potential, or of the scale of mineralized system, the\nplanned construction of the Labrador west transmission line and any benefits\nwhich may be derived by the Company therefrom, the Company's objectives, goals\nor future plans, statements, exploration results, potential mineralization,\nthe estimation of mineral resources, exploration and mine development plans,\ntiming of the commencement of operations and estimates of market conditions.\nFactors that could cause actual results to differ materially from such\nforward-looking information include, but are not limited to: commodity prices,\nsupply chain disruptions, any failure of the Labrador West transmission line\nto progress as currently expected or at all, restrictions on labour and\nworkplace attendance and local and international travel, failure to receive\nrequisite approvals in respect of the foregoing, failure to identify addition\nor expand mineral resources or the mineralized system, failure to convert\nestimated mineral resources to reserves, the inability to complete a\nfeasibility study which recommends a production decision, the preliminary\nnature of metallurgical test results, delays in obtaining or failures to\nobtain required governmental, environmental or other project approvals,\npolitical risks, inability to fulfill the duty to accommodate First Nations\nand other indigenous peoples, uncertainties relating to the availability and\ncosts of financing needed in the future, changes in equity markets, inflation,\nchanges in exchange rates, fluctuations in commodity prices, delays in the\ndevelopment of projects, capital and operating costs varying significantly\nfrom estimates and the other risks involved in the mineral exploration and\ndevelopment industry, and those risks set out in the Company's public\ndocuments filed on SEDAR+. Although the Company believes that the assumptions\nand factors used in preparing the forward-looking information in this news\nrelease are reasonable, undue reliance should not be placed on such\ninformation, which only applies as of the date of this news release, and no\nassurance can be given that such events will occur in the disclosed time\nframes or at all. The Company disclaims any intention or obligation to update\nor revise any forward-looking information, whether as a result of new\ninformation, future events or otherwise, other than as required by applicable\nlaw.\n(https://app.accessnewswire.com/imagelibrary/f4291022-7dc1-4539-923f-220e4b16a022/1242307/seven.png)\nFigure 7: Labrador West Iron Ore Project location map\n\nSOURCE: High Tide Resources Corp.\nView the original press release\n(https://www.accessnewswire.com/newsroom/en/metals-and-mining/high-tide-resources-reports-99.8-metres-of-31.7-fe-from-labrador-west-iron-projec-1242307)\non ACCESS Newswire\n\n\nCopyright 2026 ACCESS Newswire. All Rights Reserved.","article_body_html":"","raw_payload":{"data":{"id":"nACSPJ4NWa-20261027","title":"High Tide Resources Reports 99.8 Metres of 31.7% Fe from Labrador West Iron Project","author":"ACCESSWIRE","ticker":"HTRC","created":"2026-10-27T10:00:00.679Z","tickers":["HTRC"],"exchange":"","article_body":"TORONTO, ON / ACCESS Newswire (https://www.accessnewswire.com/) / October 27,\n2026 / High Tide Resources Corp. (\"High Tide\" or the \"Company\") (CSE:HTRC) is\npleased to provide its third set of assay results (Table 1) from its flagship\nLabrador West Iron Project (the \"Project\" or \"Property\"). The Project is\nlocated 20 km northeast and adjacent to the Iron Ore Company of Canada's\n(\"IOC\", majority-owned by Rio Tinto) Carol Lake Mine complex in Labrador City,\nNL (Figure 7).\n\nTable 1: Significant Iron Intercepts of Oxide-Facies Iron Formation\n\n Drill Hole ID  Easting *  Northing *  From (m)  To (m)  Length (m)  Fe %  \n 26LB0078       650874     5897279     38.5      88.2    49.7        24.5  \n                                       140.0     149.0   9.0         32.9  \n 26LB0079       651550     5895915     8.0       77.0    69.0        28.6  \n                                       111       123.9   12.9        27.0  \n                                       150.7     161.6   10.8        28.7  \n                                       190.0     202.9   12.9        25.2  \n                                       221.6     255.0   33.4        26.7  \n 26LB0080       652044     5896805     4.6       20.0    15.4        28.8  \n 26LB0082       651386     5895482     19.2      119.0   99.8        31.7  \n                                       170.0     209.0   39.0        23.3  \n 26LB0084       651875     5897243     41.0      132.1   91.1        27.7  \n\nThe above, together with the previously reported assay results, comprise the\ncomplete results from the drill holes received to date. True Widths are\nestimated to be 80 to 90% of drill core length\n*Significant Fe T (%) values are weighted length averages of continuous total\niron greater than 18% and allowing for intervals up to 9 metres in width below\nthis grade.\n**All holes were drilled vertical (-90 degrees) & UTM coordinates are NAD83\nZone 19N\n*** Drill hole 26LB0080 was terminated 20 m downhole due to technical reasons\n\nSteve Roebuck, President & CEO of High Tide, commented: \"One particularly\nnoteworthy aspect of these results is the scale they may indicate. Hole\n26LB0082 intersected a thick interval of higher-grade iron mineralization\nbeginning almost at surface along the eastern edge of the current deposit\nlimits, while hole 26LB0084 returned strong grade and thickness well beyond\nthe current northern limit. What makes this especially significant is that\nthese holes are located more than 1,800 metres apart, north to south.\nTogether, they underscore the potential scale of the mineralized system, which\nremains open in all directions.\n\nOver the course of the summer drill campaign the Company completed 27 drill\nholes for a total of 6335 metres of HQ & NQ core drilled. The Company\npublished two press releases on 31 August and 16 September disclosing assays\nfrom its drilling. Additional results will be disclosed when received.\n\nDrill collar locations and section lines are shown on Figure 1, with vertical\nlong section views (looking toward the northwest) shown on Figures 2, 3, 4, 5\n& 6.\n(https://app.accessnewswire.com/imagelibrary/9b134638-0608-4603-8163-4c1f2de57962/1242307/picture9.png)\nFigure 1. Labrador West Project - Plan map showing current mineral resource\noutline boundary, surface trace of vertical sections and location of drill\nholes.\n(https://app.accessnewswire.com/imagelibrary/f45a81e7-d083-4518-98f9-59ea743e7c95/1242307/figure-2-labrador-west-project.png)\nFigure 2. Labrador West Project - Long section A - A' - assays in red font are\nreported here and assays in black font have been previously reported.\n(https://app.accessnewswire.com/imagelibrary/ca99aab6-a3cb-48f8-be9c-a5b96973b164/1242307/three.png)\nFigure 3. Labrador West Project - Long section B - B' - assays in red font are\nreported here and assays in black font have been previously reported.\n(https://app.accessnewswire.com/imagelibrary/a77d3869-0cd3-4728-83f4-e574b950162d/1242307/labradorfour.png)\nFigure 4. Labrador West Project - Long section C - C' assays in red font are\nreported here and assays in black font have been previously reported.\n(https://app.accessnewswire.com/imagelibrary/c1557dbf-20a8-4e95-9c37-f22ca7a342f9/1242307/long-section-d--d.png)\nFigure 5. Labrador West Project - Long section D - D' assays in red font are\nreported here and assays in black font have been previously reported.\n(https://app.accessnewswire.com/imagelibrary/50bbf979-6f41-40a4-93b6-282ac6819823/1242307/eesix.png)\nFigure 6. Labrador West Project - Long section E - E' - assays in red font are\nreported here and assays in black font have been previously reported.\n\nAssays were completed at Activation Laboratories (\"ActLabs\") in Ancaster\nOntario, which is independent of High Tide. At ActLabs, analysis followed a\nspecific sample preparation protocol and analysis regime. In addition, sample\nstandards were submitted every 20(th) sample to ensure quality control and\nquality assurance consistent with CIM best practice methods.\n\nHydroelectric Power, Iron and the Western Labrador Trough Infrastructure\nAdvantage\n\nOn July 21, 2026, the governments of Newfoundland and Labrador, Quebec and\nCanada jointly announced a new power generation and transmission agreement,\nunder which the federal government committed over $1 billion to the\nconstruction of a Labrador West transmission line necessary to open new mining\nand other industrial projects in the Labrador Trough.\n\nThe Labrador Trough of western Labrador and adjoining Quebec constitutes\nCanada's primary iron producing district and is host to world-class deposits\nthat have been mined for more than half a century. These have produced over 2\nbillion tonnes of iron ore to date and are considered to have very significant\ngrowth potential. The high quality of the deposits in the region allows for a\nwide range in product diversity, which includes premium concentrate and\npellets, both blast furnace and direct reduction grades.\n\nThe Labrador West Iron Project is strategically located near the mining\ncommunities of Wabush and Labrador City in the province of Newfoundland &\nLabrador and Fermont, Quebec. The area is home to Champion Iron's shovel-ready\nKami Deposit and Bloom Lake Mine, ArcelorMittal's Mont-Wright Mine, Tacora\nResources' Scully Mine and Rio Tinto IOC's Carol Lake Mine.\n\nThe Wabush and Labrador City region is very well served with skilled labour\nand a highway as well as access to abundant low-cost hydroelectricity and a\ncommon carrier railway. The railway has 80 million tonnes per year of capacity\nfor transport of iron products to the deep-water port of Sept-Îles, Quebec,\nwhich provides year-round access to global markets.\n\nAbout High Tide\n\nHigh Tide is focused on and committed to the development of mineral projects\ncritical to infrastructure development using industry best practices combined\nwith a strong social licence from local communities. High Tide owns a 100%\ninterest in the Labrador West Iron Project which hosts a NI 43-101 Inferred\nmineral resource of 655 Mt at 28.84% Fe, as set out in the Company's technical\nreport dated April 6, 2023 and is located adjacent to IOC's Carol Lake Mine in\nLabrador City, NL. This resource is exposed at surface and was pit constrained\nfor an open-pit mining scenario. The Technical Report was filed on SEDAR on\nApril 6, 2023, and was authored by Ryan Kressall, M.Sc., P.Geo., Matthew\nHerrington, M.Sc., P.Geo., Catherine Pelletier, P.Eng., and Jeffrey Cassoff,\nP.Eng.\n\nThe Company also owns a 100% interest in the Lac Pegma copper-nickel-cobalt\ndeposit located 50 kilometres southeast of Fermont, Quebec.\n\nFurther details on the Company, including the NI 43-101 technical report on\nthe Labrador West Iron property can be found on the Company's website at\nwww.hightideresources.com.\n\nQualified Person\n\nThe technical information contained in this news release has been approved by\nSteve Roebuck,\n\nP.Geo., Director, President and CEO of High Tide, who is a Qualified Person as\ndefined in \"National Instrument 43-101, Standards of Disclosure for Mineral\nProjects.\"\n\nSampling Protocol, Analytical Procedures, and QAQC\n\nMercator Geological Services supervised the 2026 diamond drilling program.\nThis included designing and implementing a comprehensive QAQC program\nconsistent with CIM best practice methods. Core was delivered to a secured\nlocation for geological and geotechnical logging, and sampling. After core\nlogging, core was marked for sampling and splitting. QAQC certified reference\nmaterials were used for blanks and standards and inserted at a rate of every\nalternating 20th sample. All split samples were stored in a secure location in\nsealed shipping bags prior to shipment to the laboratory for assay testing.\n\nSample shipments were securely delivered via courier to ActLabs in Ancaster,\nOntario for sample preparation and analytical testing. Sample preparation was\nthrough the laboratory's standard rock preparation protocol that begins with\njaw crushing followed by pulverization of a sample split (250g) to generate a\npulp having 95% passing 0.105 mm grain size. Iron (Fe) content was measured\nusing the Lithium Metaborate fusion technique. Prior to fusion, the loss on\nignition (LOI), which includes H(2)O+, CO(2), S and other volatiles, is\ndetermined from the weight loss after roasting the sample. The fusion disk is\nmade by mixing the roasted sample with a combination of lithium metaborate and\nlithium tetraborate. Samples are fused in Pt crucibles using an automated\ncrucible fluxer and automatically poured into Pt molds for casting. Samples\nare then analyzed on a Panalytical Axios Advanced wavelength dispersive XRF.\nActlabs is an accredited commercially-operated laboratory analytical services\nfirm that is ISO 17025 registered. Actlabs is independent of High Tide\nResources, and Mercator.\n\nFor further information, please contact:\n\nSteve Roebuck, P.Geo.\nDirector, CEO & Shareholder\nEmail : sroebuck@hightideresources.com\n\nJean-Francois Meilleur\nChairman & Shareholder\nEmail: jfm@hightideresources.com\n\nNeither the Canadian Securities Exchange nor its regulation services provider\naccepts responsibility for the adequacy or accuracy of this news release.\n\nForward looking information\n\nThis news release includes statements (\"forward-looking statements\")\ncontaining \"forward-looking information\" which is not comprised of historical\nfacts. Forward-looking statements include estimates and statements that\ndescribe the Company's future plans, objectives or goals, including words to\nthe effect that the Company or management expects a stated condition or result\nto occur. Forward-looking statements may be identified by such terms as\n\"believes\", \"anticipates\", \"expects\", \"estimates\", \"may\", \"could\", \"would\",\n\"will\", or \"plan\". Since forward-looking statements are based on assumptions\nand address future events and conditions, by their very nature they involve\ninherent risks and uncertainties. Although these statements are based on\ninformation currently available to the Company, the Company provides no\nassurance that actual results will meet management's expectations. Risks,\nuncertainties and other factors involved with forward-looking information\ncould cause actual events, results, performance, prospects and opportunities\nto differ materially from those expressed or implied by such forward-looking\ninformation. Forward looking statements in this news release include, but are\nnot limited to, those concerning: developing the Labrador West Iron Project\ninto the next stage of development, any expectation of growth of the Company's\nmineral resource or its potential, or of the scale of mineralized system, the\nplanned construction of the Labrador west transmission line and any benefits\nwhich may be derived by the Company therefrom, the Company's objectives, goals\nor future plans, statements, exploration results, potential mineralization,\nthe estimation of mineral resources, exploration and mine development plans,\ntiming of the commencement of operations and estimates of market conditions.\nFactors that could cause actual results to differ materially from such\nforward-looking information include, but are not limited to: commodity prices,\nsupply chain disruptions, any failure of the Labrador West transmission line\nto progress as currently expected or at all, restrictions on labour and\nworkplace attendance and local and international travel, failure to receive\nrequisite approvals in respect of the foregoing, failure to identify addition\nor expand mineral resources or the mineralized system, failure to convert\nestimated mineral resources to reserves, the inability to complete a\nfeasibility study which recommends a production decision, the preliminary\nnature of metallurgical test results, delays in obtaining or failures to\nobtain required governmental, environmental or other project approvals,\npolitical risks, inability to fulfill the duty to accommodate First Nations\nand other indigenous peoples, uncertainties relating to the availability and\ncosts of financing needed in the future, changes in equity markets, inflation,\nchanges in exchange rates, fluctuations in commodity prices, delays in the\ndevelopment of projects, capital and operating costs varying significantly\nfrom estimates and the other risks involved in the mineral exploration and\ndevelopment industry, and those risks set out in the Company's public\ndocuments filed on SEDAR+. Although the Company believes that the assumptions\nand factors used in preparing the forward-looking information in this news\nrelease are reasonable, undue reliance should not be placed on such\ninformation, which only applies as of the date of this news release, and no\nassurance can be given that such events will occur in the disclosed time\nframes or at all. The Company disclaims any intention or obligation to update\nor revise any forward-looking information, whether as a result of new\ninformation, future events or otherwise, other than as required by applicable\nlaw.\n(https://app.accessnewswire.com/imagelibrary/f4291022-7dc1-4539-923f-220e4b16a022/1242307/seven.png)\nFigure 7: Labrador West Iron Ore Project location map\n\nSOURCE: High Tide Resources Corp.\nView the original press release\n(https://www.accessnewswire.com/newsroom/en/metals-and-mining/high-tide-resources-reports-99.8-metres-of-31.7-fe-from-labrador-west-iron-projec-1242307)\non ACCESS Newswire\n\n\nCopyright 2026 ACCESS Newswire. All Rights Reserved."},"type":"article","timestamp":"2026-10-27T10:00:00.797784427Z","server_sent_at_ms":1793095200797},"received_at":"2026-10-27T10:00:00.915Z","source_url":"https://www.accessnewswire.com/newsroom/en/metals-and-mining/high-tide-resources-reports-99.8-metres-of-31.7-fe-from-labrador-west-iron-projec-1242307"},"analysis":{"id":"168483","press_release_id":"180649","analysis_json":{"industry":{"label":"Metals & Mining","sector":"Materials"},"redFlags":["early-stage exploration results -- inferred resource only, no economic study or reserves","hole 26LB0080 terminated 20 m downhole due to technical reasons"],"eventType":"operations_update","narrative":"High Tide Resources reported its third batch of assays from the Labrador West Iron Project, highlighted by a 99.8 metre intercept grading 31.7% Fe starting near surface in hole 26LB0082.\n\nThe summer campaign completed 27 drill holes totalling 6,335 metres, with holes 26LB0082 and 26LB0084 striking strong mineralization more than 1,800 metres apart and open in all directions.\n\nThe project sits adjacent to IOC's Carol Lake Mine in the Labrador Trough, which hosts a 655 Mt inferred resource at 28.84% Fe, with regional infrastructure support from a new federal over-$1 billion transmission line commitment.","sentiment":"bullish","agentHooks":{"shouldPost":false,"suggestedAngle":"Thick, high-grade near-surface iron intercepts expand potential scale of Labrador West deposit in Canada's premier iron district."},"keyFigures":{"customDimensions":{"best_intercept":"99.8 m at 31.7% Fe (hole 26LB0082)","key_intercepts":["99.8 m @ 31.7% Fe (26LB0082)","91.1 m @ 27.7% Fe (26LB0084)","69.0 m @ 28.6% Fe (26LB0079)"],"metres_drilled":6335,"inferred_resource":"655 Mt at 28.84% Fe (NI 43-101, April 2023)","drill_holes_completed":27}},"quotedText":"these holes are located more than 1,800 metres apart, north to south. Together, they underscore the potential scale of the mineralized system, which remains open in all directions.","namedEntities":{"people":[{"name":"Steve Roebuck","role":"President & CEO"},{"name":"Jean-Francois Meilleur","role":"Chairman"}],"products":["Labrador West Iron Project","Lac Pegma copper-nickel-cobalt deposit"],"companies":[{"name":"High Tide Resources Corp.","ticker":"HTRC","relationship":"filer"},{"name":"Iron Ore Company of Canada (IOC)","relationship":"neighbouring producer (Rio Tinto majority-owned)"},{"name":"Rio Tinto","relationship":"majority owner of IOC"},{"name":"Champion Iron","relationship":"neighbouring producer"},{"name":"ArcelorMittal","relationship":"neighbouring producer"},{"name":"Tacora Resources","relationship":"neighbouring producer"},{"name":"Activation Laboratories (ActLabs)","relationship":"assay laboratory"},{"name":"Mercator Geological Services","relationship":"drilling program supervisor"}],"dollarAmounts":[{"amount":"over $1 billion","context":"federal government commitment to Labrador West transmission line"}]},"materialImpact":{"score":2,"reasoning":"Positive drill results from a micro-cap exploration project, including a 99.8 m intercept at 31.7% Fe near surface, but these are early-stage assay results with no economic study and routine for an ongoing campaign."},"tickerRelevance":{"others":[],"primary":"HTRC"},"globalImportance":12,"audienceRelevance":8,"eventTypeSecondary":[],"importanceComponents":{"tickerTier":"micro-cap CSE junior miner","eventGravity":"routine exploration assay update","sectorWeight":"iron ore / Labrador Trough","commodityAngle":"positive but early-stage drilling news"}},"event_type":"operations_update","event_type_secondary":null,"sentiment":"bullish","material_impact_score":2,"narrative":"High Tide Resources reported its third batch of assays from the Labrador West Iron Project, highlighted by a 99.8 metre intercept grading 31.7% Fe starting near surface in hole 26LB0082.\n\nThe summer campaign completed 27 drill holes totalling 6,335 metres, with holes 26LB0082 and 26LB0084 striking strong mineralization more than 1,800 metres apart and open in all directions.\n\nThe project sits adjacent to IOC's Carol Lake Mine in the Labrador Trough, which hosts a 655 Mt inferred resource at 28.84% Fe, with regional infrastructure support from a new federal over-$1 billion transmission line commitment.","key_figures":{"customDimensions":{"best_intercept":"99.8 m at 31.7% Fe (hole 26LB0082)","key_intercepts":["99.8 m @ 31.7% Fe (26LB0082)","91.1 m @ 27.7% Fe (26LB0084)","69.0 m @ 28.6% Fe (26LB0079)"],"metres_drilled":6335,"inferred_resource":"655 Mt at 28.84% Fe (NI 43-101, April 2023)","drill_holes_completed":27}},"named_entities":{"people":[{"name":"Steve Roebuck","role":"President & CEO"},{"name":"Jean-Francois Meilleur","role":"Chairman"}],"products":["Labrador West Iron Project","Lac Pegma copper-nickel-cobalt deposit"],"companies":[{"name":"High Tide Resources Corp.","ticker":"HTRC","relationship":"filer"},{"name":"Iron Ore Company of Canada (IOC)","relationship":"neighbouring producer (Rio Tinto majority-owned)"},{"name":"Rio Tinto","relationship":"majority owner of IOC"},{"name":"Champion Iron","relationship":"neighbouring producer"},{"name":"ArcelorMittal","relationship":"neighbouring producer"},{"name":"Tacora Resources","relationship":"neighbouring producer"},{"name":"Activation Laboratories (ActLabs)","relationship":"assay laboratory"},{"name":"Mercator Geological Services","relationship":"drilling program supervisor"}],"dollarAmounts":[{"amount":"over $1 billion","context":"federal government commitment to Labrador West transmission line"}]},"model_name":"glm-5.3-flashx","prompt_hash":"sha256:5c812bd9e28b810d","schema_hash":"sha256:05005c02d9cffac9","created_at":"2026-10-27T10:00:10.353Z","global_importance":12,"audience_relevance":8,"importance_components":{"tickerTier":"micro-cap CSE junior miner","eventGravity":"routine exploration assay update","sectorWeight":"iron ore / Labrador Trough","commodityAngle":"positive but early-stage drilling news"}},"durationMs":7402,"modelName":"glm-5.3-flashx"}}